Search results

I've had good luck using the fuzzy side of velcro.

My PP2 is VVNV.

So if it's the injection pump, why is mine no longer making the noise with a new engine and the original injection pump? It rattled like crazy before the engine was replaced. I just took it out at lunch and there is ZERO rattle.

Mine had both the tick and the 2K rattle. Just had the engine replaced because of cylinder scoring and excessive oil consumption. The new engine is very quiet. No tick and no rattle. I only have about 250 miles on it so far so that may change. I hope it stays quiet but if it comes back I...

Does anyone know if these allow rain water to get into the air box?

Found these vintage pumps last weekend.

2.5 quarts/1000 miles when the dealer did their consumption test.

Rattle is usually between 2100 and 2500 rpm under very light throttle. Mine is louder when it is cold and usually doesn't go away when warmed up. Sounds like a timing chain tensioner issue to me except is is very sensitive to throttle position.

In the shop now for a new short block. Excessive oil consumption and scored #5 cylinder. 2019 PP2 with 8000 miles. Oil consumption started at 3000 miles. Has the tick and 2K rattle as well.

This happened a few miles from where I live. What an idiot! He should do jail time.

Here's mine. Pretty much stock except for some cosmetic stuff. Springs may be in the future.

That PP2 in the add doesn't seem to have the Cup2 tires. The fronts don't seem to poke either. Did Ford change the spec on the PP2 package?

It's a manual and I don't lug it. My daily driving is typically between 3K to 5K rpm with an occasional blast up to 7K. I believe it's a broken ring land as others have had the same issue. This engine has had the rattle at light throttle openings between 2K and 2.5K rpm since about 1000...

The best my dealer will do on a loaner is a Focus.:curse:

I went real easy when I broke mine in and I have problems. I broke in my 2012 like I stole it and never a problem.

Are you going to apply them yourself?

I went with matte black with matte red stripes on my magnetic. This is the third set and I think I'll stick with this combo. Started out with gloss black with white stripes. Then replaced the white stripes with gloss red. The gloss black vinyl had a lot of orange peel so I pulled the vinyl...

I did an oil change on my 19 at 3000 miles and all was well. Checked the oil at 4000 miles and it wasn't even on the dip stick. It took almost 2 quarts. I decided to scope the cylinders. A photo of cylinder #5 is attached. All cylinders had some level of scuffing and scratches but nothing...

I just bought a dozen Cervinis upper grilles..........You know.......Just in case.