Search results

Has anyone added an electric fan to the heat exchanger with a Loki kit and did you see a difference? I wished I had opted for the bigger heat exchanger from the Odin kit, one can be added but it ain’t cheap lol, if anyone may be interested in a brand new Loki kit heat exchanger I’d probably...

Very easy to install, I had the same problem but didn’t read the directions lol, take a large screw driver or pry bar and remove that metal washer/flange then the bushing slides in and then reinstall the washer/flange back on and as you tighten the bolt it will pop back into place, I believe it...

I just ordered a Loki kit, hopefully all will be fine.

Mr Vizard I’ve enjoyed your books in the past, I’m sure many people here don’t realize you are. You are a man of much automotive knowledge

I understand that itch very well lol, try and give yourself a week or two and see if the desire is still there, try not to look and go about life, it’s hard but sometimes a few days of ignoring it makes you glad you didn’t do it, I been through a Redeye Challenger and new desire truck and a...

Any promo codes available?

Can I get a coupon code plz, I got a cart ready for purchase.

would you have the TSB # and any other info that i can give to the dealer they dont seem to be having luck, theyre talking about a bad tranmission lol id like to have an explanation to that but the car goes back tomorrow morning

i have an appointment at dealer tomorrow morning, im going to stress about there bshould be an update for the computer and let them know this looks to be a common issue.

im having the same exact problems

i been having the same issue with my 20 6 speed, difference i only had the wrench light come on once, i just got the car nearly a month ago with 8700 miles, dealers around here dont have a clue either, im guessing a computer update is needed

My 2cents, I have never ever seen a car lug nut take 150ft lbs, these are the kind of torque value you may see on a f250, f350, 3/4, 1 ton truck, I have removed the lugs off my 19 and they were not at 150, maybe 95 - 100, nor would I risk snapping these lugs torquing at 150 no risk gouging the...

Lake Speed Jr. From Joe Gibbs Driven Oil has a lot of great info on oil and the terms and viscosity meanings on YouTube, I learned quite a bit by watching his vids and explanations

Dam I placed an order with them today before I seen this, hopefully all is well

I got an engine light, took it to the dealership, car has 1448 miles, 19 gt. Service guy calls me and says there is a tsb and computer update along with replacing the cat. Seems odd this new but perhaps there are some vehicles that need to be checked for updates?

I couldn't find any PuP oil any were , I went with Driven 5/20

I have discovered that I could use a 1/4in drive ratchet and deep socket and ran my arm down along the side of the head I could easily unbolt and remove and go back and install the nut with my fingers, I tried all the extensions and swivels and it was a no-go, as long as you don't have Dorian...

That ms109 I believe is oxygenated that should be worth some power.

Add a couple of gallons of that 116 with at least 7-10 gallon of pump gas it'll dillute it enough to be safe on them o2, Ive done it numerous times with 100 LL and never had a o2 problem, heck I've ran 100LL straight on different cars with full tanks as long as you refill with pump fuel, the o2...

With 12.0 compression anything better than 91,93 octane pending the computer ability to spread the timing is a + especially down low in the rpms.