Search results

2:16 at cota, quick googling says zr1 did 2:13

hauled a bag of r23 insulation. it would not go in thru the trunk . 5/10 recommend

rough math equates to being about 55 feet behind.

i don't understand why hyvee (grocery store) e85 (measured e70) is 2.29 today, and a couple miles away at a holiday e85 (unmeasured) is 3.99. easy choice though

follow up after this year. I added @GTP hood vents, along with a larger turbo and a turbo blanket. i DID NOT get around to opening up the grille honeycomb. Not only were the temperatures more stable, but according to the datalogs, it was making ~80 more hp/tq than the stock turbo, but it also...

AI Overview Major California refinery closures in 2025-2026, including the Phillips 66 Los Angeles refinery and Valero’s Benicia refinery, are reducing state refining capacity by nearly 20%. These shutdowns, driven by environmental regulations and declining demand, have caused California gas...

refineries in california are closing down?

road america

Picked up 7 seconds from last year Year/Make/Model/Trim: 2019 Mustang Ecoboost PP A10 Track/Course: Road America w/ kink Best Lap Time: 2:40.807 Tires (Size & Model): 255/40ZR19 - Yokohama ADVAN Apex Pump E70+Fuel Factory E85, NX2 Turbo

printed an external mic holder for the track (sock not shown), hopefully it will have less wind noise than putting it in the cupholder

i replaced mine in mid 2023 with p/n JR3Z-14A411-H . you could call the ford performance phone number and see if that is the latest revision.

finally got my vents from @GTP installed. I asked if they could be matte/satin to match my PP wheels and they came out great. Off to road america in 2 weeks.

how do i fix this perimeter area where the oem vent used to be (not the large cutout area i added)? it kind of goes away with water but comes back when it dries. explain it like i know nothing about detailing

almost had a mustang moment while attempting to make a lane change and flooring starting at 60

check the purge valve, it has probably failed by now. disconnect the quick connect from the intake side just after the throttle body and cover the hole on the manifold. try out your two scenarios. i would guess the voltage difference is just a fuel economy thing.

someone in my metro area has one in a big mancave complex. i'm gonna have to make my way to one of these events in hopes to see it

amg one isn't street legal in US 🤷‍♂️

trying to keep the shit slinging going

4.49 93 2.29 E70

took a scan of whatever this front thing is called, then going to model something to print