Search results

I connected my charger/tender cable to the battery clamps using the clamping nuts/studs. Battery never lost connection in any manner.

If you're really concerned, install a hidden GPS tracker. You can find your car after stolen before it can be stripped. This one is $130, with the first year $70 subscription included in purchase price. And then add a window sticker. Or.

Actually, remembered seeing the adapter while looking for something else. Have always kept it in mind just in case.

Just a thought for anyone needing USB for powering only: https://www.amazon.com/YIPIN-HEXHA-Converter-Female-Adapter/dp/B0B24MF21J/ref=sr_1_3?crid=1HTWWLDIOZGC2&keywords=12vdc+to+usb+adapter&qid=1673650053&sprefix=12vdc+to+usb,aps,99&sr=8-3&th=1 Using an add a fuse, this could be put on a...

If a PO box would suffice, here's a list of counties that do not emission test. Then you just need to find a lazy tester, like I have.

Wish I could help. I live in Stanly County (1 hour east of Charlotte) - no emission test. I walk into my usual test site with registration card and odometer reading, and walk out with the "passed" checklist and my wallet $13 lighter. The guy never leaves the office.

Thanks StangTime.

I have a '21 PP. Seems I read somewhere that my PP is slightly lowered as compared to the base model. I have purchased a set of Steeda Ultralite linear springs, but now wonder how much lower they will result in. So, my question is - is the 2021 GT PP car factory lowered, and by how much ...

For anyone interested -rokblokz.com is $10 less than Amazon at this writing. Also, they accept ShopPay and PayPal.

The Coverking RSD might weigh 10 lb, but I doubt it. My guess would be closer to 7 or 8. It's molded carpet with no backing.

The Coverking I put in not only lets sound through, it almost made up for the weight of the sub system. PS The edges of the RSD are not tucked under the trim yet in photo. Looks a little better tucked.

I went with the Boomba Racing shifter. It simply replaces the shift lever with a shorter one. Didn't like the shift knob that I bought to go with it, so used the OEM instead. https://www.boombaracing.com/s550-mustang-short-throw-shifter/ I then tied the rear of the shifter unit to the...

I put in a Coverking RSD. It's molded carpet and allows sound (sub woofer) to pass through easily. And, it's $120.

I put the Injen Evolution in my '21. Did it mostly for looks. It actually looks like it belongs, where the stock box does not. Also, the Injen is a true closed box - it does not have a lid. The filter goes into a hole with a Twist-to-Lock. As to higher IAT, the Injen "plugs" into the same...

That's an easy weld by a good exhaust shop.

https://bumperplugs.com/bumperplugs/bumperplugs-for-ford

I think I could live with color matched plugs. They would likely only be noticed if you were looking for them. Plus, you could keep your eyes open for some unique bling to make use of the holes. I put a blank deck lid panel on and added a little vinyl. Easily changed for something else when...

Use a good sized screwdriver to latch the door while it's open and the window will go up. Don't forget to "open" the door before closing it.

Please read posts #50 and #51

I haven't purchased a spreader yet, but will probably buy this. Looks like it will do the job without breaking the bank. Also, doesn't require removing the caliper. I don't yet know what's needed to wind back in the rear pistons, but the correct tool should be in this kit.