Search results

MMR is running a special for Mustang6G members only, for 1 week only get BOTH the MMR Billet oil pump gear and MMR Billet Crankshaft gear for just $479.99!!!! Orders will be taken via PHONE ONLY and this special expires Tuesday Sept. 20th!! NO EXCEPTIONS If you order something in addition...

We figured we would share this pic with the Mustang 6G members, this is one of the new MMR Gen X Longblocks (351X), these bad boys are 351 cubic inches and this particular one features Shelby GT350 cylinder heads and a whole host of new mmr parts! Enjoy!

MMR 5.0L TI-VCT HIGH RPM COMPETITION PULSE RING Billet Design, not stamped steel for increased accuracy Tighter fit on crankshaft to prevent movement for better repeatablity Fits: 2011-2017 5.0L Ti-VCT Coyote engines ALL Ignition pulse ring modified to support higher RPM engine builds Extends...

These awesome new covers from MMR feature true screw in oil fill caps, blow out proof dipstick provisions, -12 Screw in PCV fittings (not twist to lock like factory) , and stainless steel hardware. Available with or without VCT solenoid holes for a ultra clean look.Includes screw in Billet Oil...

MMR's new Road Runner ICX is the ultimate manifold for 2011-2017 5.0 Coyote engines. Designed for street, road race and drag use up to 1800RWHP. Bottom feed design sends air from the bottom up into the plenum for near perfect air distribution into each cylinder! Fits all 2011-2017 Mustang GT...

Although we released these adapters a few months ago it seems many people were still not aware that we had them. We offer two different adapter for the Throttle body or Intake manifold. The First Adapter is for Someone that wants to run a GT350 TB on a stock 11-16 Manifold >>...

Enjoy! [ame]

Enjoy: [ame]

UPDATED 9/15/2020 - SALE!! MMR is pleased to release its new Lightweight billet water pump pulley's, the 100% USA made Billet alloy pulley's reduce rotating weight/mass by removing the heavy stamped steel factory pulley. This helps improve throttle response and takes less HP to turn. This is a...

We figured we would share some pics of the new MMR Gen X Billet Block with the Mustang 6G members, enjoy! Some of the new features: *Available in 5.0 or 5.8 Coyote Deck Heights (up to 400ci) Accepts all 5.0 Coyote / GT350 cylinder heads *Gigantic 9/16 Cylinder Head Threads (uses a 9/16 to...

We figured we would share some pics of the new MMR Gen X Billet Block with the Mustang 6G members, enjoy! Some of the new features: *Available in 5.0 or 5.8 Coyote Deck Heights (up to 400ci) Accepts all 5.0 Coyote / GT350 cylinder heads *Gigantic 9/16 Cylinder Head Threads (uses a 9/16 to...

MMR is pleased to release its Runner Control deletes / lockouts for all 2015 + Coyote 5.0 and GT350 manifolds. This kit locks the runner "flaps" in the full open position. The benefit of the factory CMCV is to increase velocity through the port at low engine speeds. Supercharged and turbo...

This Billet Alloy water pump pulley from MMR replaces the heavy steel factory pulley, which in turn reduces parasitic loss, increases throttle response and increases HP!! Available in factory 3 bolt or 4 bolt pattern - select below. *Lightweight Vented Design *Direct Factory Replacement...

MMR is pleased to release its new Lightweight billet water pump pulley's, the 100% USA made Billet alloy pulley's reduce rotating weight/mass by removing the heavy stamped steel factory pulley. This helps improve throttle response and takes less HP to turn. This is a great product for those...

We would like to Congratulate the following racers for personal bests, great runs and just downright fast passes using MMR coyote engines at last weeks NMRA event!! John Kauderer 8.16 Frank Varela 7.71 David Witt 8.11 Haley James 7.71 Mellissa Urist (2015) 9.0 @ 162mph Huge Congrats...

For those that were not aware MMR has a simple adapter to allow use of the factory throttle body on the GT350 manifold. This helps cut cost and minimize tuning for those on a budget, these can be ordered directly from MMR or other great MMR dealers such as JDM, Team Beefcake, Lethal Performance...

Plumb a external oil system, oil cooler or oil filter relocation kit with this Billet Alloy block adapter from MMR. This adapter blocks the 3rd Hole on ALL 15+ GT and GT350 blocks. Features: -10 AN Inlet / Outlet O rings for block to adapter for a perfect leak free seal! 1/4 NPT...

This Billet Oil Filter relocation kit from MMR is 100% USA Made. No Cheap Chinese parts with Pipe Threads that leak. The adapter replaces the ENTIRE factory oil filter adapter / mount which is great for clearance. These High Quality adapters feature AN O ring openings for a Leak free install...

MMR 2011-2015 Mustang / F150 Coyote SHD (super heavy duty) secondary Chains (pr) These new chains from MMR eliminate the secondary chain failure on Drag Race and Road Race applications that is common with aftermarket Camshafts and Valve springs. The factory chains were never designed to...

We figured we would share a pic of the new MMR Gen X Coyote Billet Block in the machine being rough cut, this one is the new MMR tall deck version which a 5.8 Liter . We also offer the 5.0 liter version with many options, stay tuned for pricing and other great options that MMR will be releasing...