Search results

275/35/20 will look really good. To me, once you drop down to a 30 series aspect ratio tire on a 20" rim, then the sidewall starts looking thin. I'm running 275/35/20's on my 20x10 rims on the front of my car currently.

To be honest, I don't remember what my car felt like with the stock intake and TB as I got the PowerPack 3 installed right after it first came out which is over 3 years ago now. For me since I already had the GT350 intake manifold was if I had to go back to using the stock TB, I'd have to buy...

I sense your questioning here since your aftermarket cats failed on your boosted set-up. I don't see that they warranty failure on on their website, but if you actually went to the link I posted and read about the company and product, you'll see that these cats were designed for boosted...

Gesi makes two versions, high flow and ultra high flow. I bought the ultra high flow ones that can handle higher temps. They're 300 cell cats. All I can say is read about them and to the OP...do your research. But these are the best ones I could find out there. These aren't the ones offered...

I just installed Gsport Gesi ultra high flow green cats on my car in preparation for going FI sometime in the very near future. These cats are supposed to handle up to 850HP per cat and temps up to 1700F. Look up Gesi cats on the web and you'll find out they're made for FI and race cars. I...

I've had plenty of roll races against just about anything and everything on the street. Knowing your cars sweet spot is key. I'm not going to do a 60 roll and start out of 3rd gear. I'm going to slow you down to 50 so I can start in 2nd in my sweet spot at around 6Krpms.lol You've got to...

I'm using my 87mm TB still with my new custom tune. My tuner didn't have any issues with tuning the 87mm TB and I don't notice any drivability concerns while driving. Not sure why tuners aren't using the GT350 TB.

I hear ya. I only have 3 1/2" outlet tips because of the space limitation of cutting out the premium valance. 4" might work, but it might require patience and bending of the hanger rods so the muffler tips go towards the outside of the valance where there's more space to cut it out...

Looks good. I just said screw it and modified the premium bumper to install my quad tips instead. I never really liked any of the lower valances out there and I like my body color on the lower valance.

I ran the PowerPack 3 tune for about 3 years until a few weeks ago when I got my long tube headers and cats. I just removed the tune, bought a Lund Ngauge and had my local tuner tune my car with HPTuners software on the Ngauge. Worked at well and my dyno number is below on 93 pump gas. Not...

I just bought the touchscreen control panel on the 18th of this month, but I haven't received it yet. I've bought the 4 piece dash overlay kit about 2 years ago and got it fairly quick. Pieces are good quality and so far I've only had good experiences.

I can't imagine they're not deep enough. I had no problems and I can't imagine the pockets on the Foundry wheels are deeper than a PP1 wheel. If you lived close I'd let you try mine as I don't use them anymore since I got new wheels.

Have you noticed whether the PP1 wheels have the little pockets on the hub section or not? I know my original 20" Foundry wheels did so there was no problem with the stock length studs.

I have a set of the Eibach 20mm spacers that I was using with my Factory 20" Foundry wheels. No problems with them at all and no need for new studs to use these spacers.

I'll share a Driver mod win for me...or loss...you decide. :) Came across a new 2020 GTR about a month ago with T-tags and a mid 20's driver playing around in traffic. We went back and forth and we finally did a turn around and jumped on the other side of the roadway with nobody in front of...

Been extremely busy with the car this year. Added my Steeda progressive springs, Gforce axles, BMR suspension pieces, Stainless power long tubes with Gesi ultra high flow green cats, new BC Forged RS45 wheels and tires,full AM tint kit and had my MRT rear louvers custom painted gloss black...

My new set-up. BC Forged RS45 in gloss black 20x10 et30 front with 275/35/20's and 20x11 et50 rear with 315/35/20's on Steeda progressive springs. The concave on these wheels is what I fell in love with.

Yes we do!

My factory wheels I just took off were 20x9 with a 265/35/20 on the fronts with my Steeda Progressive springs and they fit just fine even with 20mm spacers. NO rubbing at all. A 265/35/19 will fit just fine on your 8.5" wheels.

Here's a pic of the new set of Atlas Force UHP tires. Fronts 275/35/20 and rears 315/35/20.