Search results

Loud cruising... even worse when you put the pedal to the floor.

You may want to check with Lokar as well. They have many transmissions to choose from if you know the I.D. of the 6r80 dipstick hole and can size up one of their offerings. I've used these in the past and they work great and usually sit lower on the firewall...

Any Minnesota owner still have their 15-17 GT exhaust they'd like to get rid of? I'd like to add back the stock exhaust.

For a car that has less than 100% anti squat and can neve achieve over that percentage based on fixed angles, why would you need double adjustable shocks for this platform?

There is one way up on top. I used a 1/4 drive 10mm socket with a swivel and a few small extensions to get it. It's the hardest starter bolt to get. Make sure you get that one first, so once you crack it free, you can take it out by turning the extension by hand.. If it's the last one, you'll...

Drives great, you'll have no issues. I run one tank of 93 every 5-6 tanks to keep the fuel system clean from the yellow e86 gunk

Would the H-pipe bolt in with a Corsa Sport Cat back?

I didn't have to do a relearn with either the OPG, or when adding a torque converter.

This kit is definitely on my list of things to get.

I'd have no issues with the oil lines, but I would remove the oil pan and properly install bungs. Tapping a thin oil pan is not my idea of a quality install.

I'd ask what is involved for the $1000.00. Are they changing the filter, flushing the entire system, plus adding new OEM trans fluid? If brake jobs are $400-600.00 these days at retail shops, than I can see this costing 1000.00. In most industries these days, I have found 1000.00 to be the...

If you are ok with mounting your ECM and fuse panel under the passenger headlight than it's a decent kit. I sold the kit because I didn't like the ecm/fuse panel relocation into the elements. I don't really drive my car much and even rarely get caught in the rain. But that was a major issue in...

I’ve been1.17 with glued on radials, buy some permatex hi tak and glue on the tires. Usually tire shop mounted radials will move a bit and finally seat after a few hard launches.

I'm still on this forum. Doesn't see to be many Mustang enthusiasts in this state. Even though we had TCstangs as a local forum years ago.

Youtube has several visual demonstrations. It's pretty easy when you see it done on there.

I'd make sure you springs are clocked correctly in the rear. It can be difficult to see if they are lined up correctly in the LCA.

These cars need all the help they can with traction. Has there ever been an S550 to run 1.1x in the 60ft? These are great cars, but this is one chassis I wouldn't want to run sub 8.50's in. With it's non adjustable rear suspension, you are asking for trouble. I know there are many cars that...

Correct. I should have seen it was 18+.

If you can unbolt and bolt things back together and follow visual instruction on youtube to line up the chains, you can perform the OPG install.. Autozone rents a ft/lb torque wrench, balancer puller, and balancer installer. It's a Friday night -Saturday morning job. As you may have read...

Catless does have some fume smell. I compare it to smelling smokers these days. Years ago, I never really smelled smokers(before smoking bans). Today we can't have smokers anywhere near the public, so you smell it more. Same with today's cars. The fuel smell is gone , but is easily noticed now...