Search results

Yeah I found buying in Oz was actually cheaper than anything else.

I no complain

Btw with it aired out, the lowest point of the car(the resonator) is about 25-30mm off the deck.

Sure you could do that.

1. not yet. 2.Not much really. the stock springs and shocks weigh considerably more so, maybe not even 10kg. 3. As hard as I can where possible. Yes I throw it into corners! I chased a bike from the lights the other day and smashed it into 2nd and instead of squatting it broke traction and i...

That's ok Burkey I think Black wheels, black rooves and DRL's are all just a fad and are therefore perfect for commodes. Like I said, it handles great and it's almost eliminated the squat and dive of the stock suspension! I think I'll wait till I've put some big wheels on it before doing some...

Yeah Baby!....

Just when I'd finished...

3.00am at the car wash...:D

G'day peeps, Well I've got it mostly finished but I've had some problems. On testing clearance on the front I found that spinning the front wheels while on the hoist was fine but once loaded up on the ground it was a different story. Backed the car out and the right hand clip on wheel weight...

New tank that actually fits on the left compared to the stupid thing they supplied... Tank bracket. I fitted a nutsert to one side and a nutsert to the floor for the other because it's to close to the back of the wheel well to get at... Preliminary RHF sensor bracket. 2mm stainless....

RF before strut removal and I've run the harness roughly here too.... Here's where the harness comes out. and a tip for convoluted tube application. If you tape up the harness at the end then bring the end of the tape out the split in the tube, you can then tape the end up and it won't run...

When I finish my Accuair setup I'll let you know a range of settings at different heights. I'll prob run 70-80mm down most of the time, depending on what wheels I get also.

I just want a V8 or V10, no electric motor. Btw I have a 3valve V10 to put in my Falcon ute :)

I reckon Electric means a loss of soul for a Mustang.

How to remove soul in one easy step!

No worries CasperGT, If you look at the pic showing the ECU and VB you'll see the ECU has the AUS spec label on it. That is the difference between legal and not.

Yep this is a legal kit but, in WA you just go over the pits and get a permit. Engineers not required. Burkey, I forgot to answer one of your questions. I've just got an Eclipse brand tool, not hydraulic. Btw you can make a pretty good one by welding a bolt to a nut..I'll take a pic of one I made.

That's ok peeps. I aim to help, I don't think it's a diversion.

TXL is cross-linked polyethlene wire. Not single strand. It's so good because the insulation doesn't want to burn or melt when subjected to heat. In fact solder is not good in automotive circles because dissimilar metals create a virtual battery effect which actually creates corrosion. I wish I...