Search results

I found the dealer but didn‘t find Zach…

Contact info?

I need a better endoscope, but here is a pic of my 2020 GT360R which is not on the list. Looks good to me. I tried going down the PVC on the driver's side - no go. D.

USB update didn't work. I connected it to my wifi and hope it completes the download soon. D.

Has anybody found one that is bad? D.

I am here for the April 7-8 class. Staying at the embassy suites. Saw a heritage edition in the parking lot. Went by the track. Mustangs lined up.

I'll be there April 7-8. I did not go for the race keeper. I used the PDR on the Corvette and you look at them once. I didn't see the value. Went with the insurance just in case. D..

April 7-8 for me. d.

I kinda want a set of the CS21 for my 2020 350R. They aren't the exact same size but Shelby America says it will work. D.

I had a dealer overfill the rear diff in my 2005 Ram 3500 and it blew out both axles seals. D.

OK - that is how I plan on draining it. Thanks, D.

I was worried about that. I think I'll just warm the car up and check the differential fluid level. Heck, I read it is supposed to be 9mm below the fill plug. If I full it up all the way until fluid runs out - maybe that is enough for to make up for the diff cooler? D.

Looks like there is FORScan for Windows and then a Lite version. Here is a comparison. https://forscan.org/comparsion.html Not sure if the IOS versions will do it or not. I see there is no outputs. Anybody know? I guess worse case I top it off. I can drive it and warm it up. Then...

What are people using? How about this one...

Heck, the cables are cheap enough - I'll order one. I am a Mac guy but I have a cheap windows laptop here somewhere I think. Do they have a Mac or iOS version? On the differential fluid change - I am going to run the car on the lift to make sure the transmission level is good. How long...

I would like a spare GT350R splitter also. Dallas, Texas area.

Couple ounces is all I am looking at? That seems like a non issue to me. Thanks, D.

I am 515 miles on my GT350R. I am changing the engine, trans and diff fluids. I read above the diff pump needs to be run. Is there a way to do it without a ford scan tool? Or what I the recommended tool to purchase? Thanks, D.

I am at 515miles on my 2020 GT350R. I am going the engine/filter, transmission, and differential change. I am using all motorcraft factory fill. I changed out my oil plug for one that has a magnet and can drain easier. Before people blow me up for changing the fluids too early - it is...

Good question. The fluid is draining out of my GT350R as I type. I guess I fill it up until fluid comes out of the fill hole. D.