Search results

I noticed that sometimes the lever on the side of the seat bottom used to adjust the seat back doesn't go back into the correct position. If it is not all the way down, the seat back lever won't work. As was said, release the tension on the lower lever so that it will align correctly then the...

Finally some sun!

Installed spacers. 15mm rear/20mm front.

I wanted to widen the stance and fill the wells but not go too extreme (no poke). I went with Eibach spacers. The 15mm rears are the type that require extended lugs and the 20mm fronts are the adapter style with their own lugs. Pretty happy with how it turned out. Not sure if the offset on the...

I order on-line and then pick up at a Parcel depot across the line. Lots of times the border guys don't bother making you pay the tax, ....

Thread Revival. I installed a pair of these today. Definitely make the paddles a little more functional and look great!

Installed the LMR billet paddle shifter extensions. Makes them a little more functional and they look pretty cool....

congrats!

I like #4 and #5. I have 20s on mine so i am biased, but these are big cars and imo need big wheels to look in proportion.....

Came from an 07 Carrera S. Amazing machine, so tight and precise. It was on Bilstein coilovers and had a bunch of other suspension upgrades. Kind of the opposite of the Mustang which is more of a brute both in terms of size and the way it puts the power down. I am really enjoying being back...

Beautiful

There is a puck style antenna on the truck lid as well (I think for satellite radio?). Too bad they had to tack the additional flag pole on....

I had my car parked when there was any trace of snow (P-Zeros). When I thought the coast was clear a few days later, I drove to work on clear roads but when I got to my work parking lot I was unable to climb the slightest grade with only a skim of slush/snow on the road. Just spun and had to...

Unfortunately!

Dark and rainy, but here's a couple from a bit further back.

Here is a before and after that shows the difference. It is subtle, but an improvement. BEFORE AFTER

Good idea. Never even thought of that (plus I had the Brembo decals on hand...). The G2 paint does a nice job of smoothing the rough surface a bit and adding a gloss finish. The silver is a bit on the boring side but maintains the stock look I was after. Can't really go wrong with any color...

No. Painted with calipers on the car. I did not paint the back side of the calipers, just went to the upper edge of the backside. The back side cannot be seen from any angle.

I used VHT clear. Very light coats. *I ordered the paint from the G2 site to a post office box across the border.... **Keeping in mind that I only did the fronts, probably about an hour to clean and mask, then about 15 minutes to paint each caliper (x3 coats). The clear only takes a few...