Search results

I nees to adjust camber up front. I have an idea on how to losen allen bolts without cutting the strut tower but was courious what others are doing since its not an elegant solution.

So I installed the following: BC Coilovers, DSS Half Shafts, BMR Cradle Poly Busing, BMR Poly Dif Bushing, BMR vertical links TCA045, BMR toe rods, Ford Racing Knuckle Bearing, and Steeda Rear LCA Bearing. Took the car on a short slow speed ride and wow. The car if F'd. I wouldn't want to...

So does anyone know what parts you can get with the CARB legal kit? Id ike the 72lb injectors, bigger throttle body, and open air box. Would that pass? Not from CA but need to pass emissions every year. Also how hard is it to swap from stock tune to custom and back without touching anything else?

Where can I find all the torque specs? Mainly need suspension specs but would like to know where everything is?

Has anyone installed a new rear upper control arm? If so did it make a difference? I was installing some bmr bushings and noticed that the upper control arm bushings look like sht. Kinda like the knuckle bearing and rear lca bearing I replaced. Maybe Kelly will chime in ;). Thanks!

Anyone got some pics of a 9.5" wheel with 285/35 Michelin PSS tire? I want to see how far it sticks out. Thanks!

Trying to decide on new wheels. I like the advanti hybris but really wanted a square setup so I could rotate them. Anybody got a good idea how much additional tread life you gain by being able to rotate?

In case nobody saw these..... http://www.tsw.com/rotary-forged-wheels.php

I need some recommendations for a 285/35/19 tire. Its a street driven car that has a pd blower in its future. I was set on nitto nt05's but they dont make them in the size i want. So what would be comparable. Thanks!

Really hoping someone has some pics of 18" forgestar f14's. Would really like to see an 18x10 square set up. So post em if you got em. Thanks.:cheers:

Can anyone comment on how necessary the LCA Knuckle Bearing and Rear LCA Bearing are to prevent wheel hop. I am hoping they don't make a substantial difference since they are expensive for just being a bearing and as far as I can tell a PIA to install. I am already planning to install cradle...

So who wants one. Maybe we can send the results to Ford:ford:.

?

Anyone know where I could buy the cloth OEM recaros? Would also be open to some aftermarket as long as they match the back seats and have height adjustability.

So when will someone actually have one of these!! First thing they should do is take it to a scale, then the track, then the strip so we can stop having to wait for the damn numbers.

Do we have any details on these parts yet?

I want to get a set of coilovers (considering Roush, BBC, or Cortex). I also want to get the Steeda Subframe Bushing Support Kit. Since I am far from an expert when it comes to suspension, I was hoping someone could school me :) on the additional parts that might be required (e.g. the S197's...

So I had a Brenspeed tune on my 2011 Roush Stage 2 (no supercharger and stock cats) that wouldn't pass the OBD II testing. Problem was rediness. I had driven it plenty of miles to pass, but all Brenspeed said was that they hadn't done anything to effect emissions and I had to keep driving...