Search results

They ready for the rears Kelly!!!

I can't speak for Kelly, but I've talked with him quite a bit on this, as I too wanted the most foolproof solution, but did not want to go full Aluminum at this time since it is currently my daily. That is the best solution BMR offers as it does away with the stock rubber bushings and replaces...

If I had to do again I probably would go this route. When it becomes my race car and not my daily I will be pulling everything and upgrading everything just as you have it.

So with the rear through bolts installed on the BK051 kit done several weeks back, I had been in contact with Kelly and he sent me the front through bolts to install just like on his car. Currently these are not part of the kit, and I do not know if they are planned to be, but last night at my...

I had gear whine the instant I installed my Steeda diff bushings, and when I swapped to the BMR BK051's. Take my foot off the gas and it's gone. I've gotten used to it. Between the drone of the exhaust, creaking plastic parts from ford, clanking from the one piece aluminum driveshaft its par for...

Well the plan was to get the front through bolts installed today, but due to some unforeseen issues with my friend who was going to be performing the surgery on the car, it has been postponed till next weekend. I will update the thread when we have it completed.

I'd recommend doing the through bolts if you plan on doing any drag racing in the future. Install not too bad. I was going to through bolt my fronts as well this weekend, but got pushed back till next weekend.

PM sent

Thanks Kelly!

Kelly, No dice at Home Depot or Lowes. You got any part numbers or chain stores that will have in this size or did you order online? If so who is your hookup sir?

Thanks, Off to Home Depot now.

Kelly, for the front through bolts, what direction would the bolts go in? Would you insert from the front by the gas tank or through the rear on the front ears of the diff? Just wondering if it makes a difference what side you tighten down the lock nut on. Also would use the lock washers that...

To an extent it works with the PMAS, as I installed one with mine as well as opened up he front grill, but the PMAS does not have a snorkel to attach to. The Velossa just helps direct more air to the air box opening of the PMAS. I also slightly opened that up as well.

Unfortunately we have a few dousche nozzle techs at Wildhorse Pass Raceway in Phoenix. Next closest track is 100miles away in Tucson. They give everyone crap there if they are not "by the book"... Maybe it has something to do with them thinking their shit don't stink because they are a NHRA...

Well let me know when the bits are ready I will give em a shot.

Followed you over from the FB post Kelly. So I finally had a chance to get a better look at the pictures and it looks like there are sleeves inside the stock aluminum bushings to fill the void, combined with the upgraded 12.9 bolts, thus negating the need for the through bolt on the rears for...

Kelly, Like I mentioned, I am guessing with stock shafts the bolts would have gone in just fine, and the through bolts look to be a whole lot stronger. At least we did not have to remove the half shafts completely, Just give them a little extra room. I will be curious to see if you end up...

So Wildhorse is giving shit now for half shaft loops? They gave me issues for not having longer wheel studs, and I told them nobody made them yet, but now ARP is, so looks like I need to upgrade, but sheesh half shaft loops? No wonder so many people are going to Tuscon. I'm not even sure where...

Did the replacement of the Steeda bushings and swapped in the BMR BK051's with the through bolts friday night. For those looking to do the install of the bushings for the first time, we did find that for the front bushings that go in next to the gas tank, they were a little easier to wedge in...

I had mine moved for peace of mind, but even with that, still possible that if water got on it, it could burn out. My buddies car (Choking Victim) on here, had his 02 go out on him during install. I do not run on E all the time and now Arizona only gets E54, but I do have a few extra sets of 02...