Search results

It comes in a giant cardboard box with a ton of staples. I do have to say, they have perfected packaging their hoods. The hood is supported in the box on all four corners by these foam blocks. Then the hood itself should be wrapped with plastic. I picked mine up from them after reading tons of...

Yellow is a CS color you don't see too often. I think I've only ever seen 1 guard green CS in the 2 years they were made. Mine is generic magnetic metallic..tons of them around.

Glad to see you finally got the parts! Does it look like it was sprayed with a rattle can or actually painter properly? Kinda hard to tell from the pics. I'm pretty sure I'll have my hood repainted at some point, which is shitty considering how much we all have paid for these hoods.

@HeelToeHero @MRGTX @opengl128 They have not been discontinued as it is one of their most popular wheels. They are going to be back in stock but no clue when. The manufacturer kept pushing the ETA back, and back and back. They decided to pull them from the website until they have stock in...

I have a buddy that works for LMR. I sent him a message to see if he knows why they were pulled.

There is something called Super Wrap, which is a spray-able and removable. It's made for wheels and seems to look pretty good. https://getsuperwrap.com/ Thinking of doing a satin black on my SP2 wheels. I'm tired of the bronze.

That gap looks like a normal Cervini's gap to me. Mine is the same and also had some trash in the clear coat but it did wet sand out. The paint is SUPER thin so if you attempt to fix it, be very careful. Kinda wish I would have had it painted by a shop. I will say they were able to match...

I would suggest that if you have the $ have any carbon parts cleared with automotive clear coat. I can't speak on Trufiber but Anderson does have a "marine grade gelcoat" on their pieces. I daily my car, so I got my carbon trunk cleared and then had ppf put over it to protect it. Carbon parts...

Is it just me or does the shark fin antenna kill the look of the car? It so sleek looking until you go to the roof...minor detail but it bugs me.

Yes, you need to run the wire through the back seat and up to the third brake light. I went through the rear driver side and up the B-pillar. There is an airbag back there, so be sure the wire is tucked as to not interfere with it. I zipped tied the wiring and tucked the remainder above the...

Wow...that's a new one. I've been detailing for about 20 years and never heard of that. I'm very interested to see if it actually works. I'm assuming it can't be the chunky kind. :cwl:

Both my mirrors do it all the time. Just hit the memory button again and it will go back to your preset position. It's like it forgets what its doing.

It seems like the Bullitt brakes are a visual upgrade from the PP brakes. If this is correct, you would need to have the PP Brembos already to just upgrade the calipers...

Fitment Industires has a pretty good gallery for our cars. You can see what other people are running, suspension mods and tire sizes. https://www.fitmentindustries.com/ Element wheels has a good selection of wheels as well. https://www.elementwheels.com/ Good luck with the search, I know I've...

I honestly only had that spoiler for about 6 months. From like May to October of last year. No issues at all, with the wrap. It's sitting in my basement still, need to get around to selling it. lol.

I also say gloss. I had my wicker bill wrapped gloss black to go with all the other gloss on the car. The satin spoiler didn't look right with everything else being gloss. Since then, I switched everything to satin and got rid of the wicker bill. Any good wrap shop should be able to wrap the...

I would remove the spoiler and strip all the tape off. Then apply new double sided tape all around the base of the spoiler. 3M makes their tape in all different widths. It couldnt hurt to put some double sided tape over the OEM holes. When i did my wicker bill, i had a few extra holes, since i...

This is exactly what i was afraid of happening. I have the bubbles in my hood and took it into the dealership. My claim was approved and was going to schedule the time to drop the car off. That's when the service guy told me they use an outside body shop to do their work. I wasn't going to drop...

Nice, they do great work and also hooked me up with a good alignment guy. If you talk to Luis, let him know that Shawn sent you.

Nice! I'm glad it worked out and you got it done. Funny story, today my car is at a shop that will remain nameless in Northern NJ, getting suspension work done....or so i thought. I dropped it off this morning and went back at 3 pm on my lunch. I was going to see how it was going and find out...