Sponsored

Search results

  1. Best way to launch in a stock PP Manual?

    Hold the button down for 10sec.. If you get wheel hop get out of the throttle.
  2. PP2= 10ths of seconds increase??

    Base GT+gt350 manifold+ Lund tune and you will beat the Camaro. You literally need nothing else. Stock intake stock exhaust. If you want to roll race the 3.31s with the gt350 manifold are a great match. Best I have seen a SS do at the strip on slicks has been 12.3. It has a tune, he blames it on...
  3. PP2= 10ths of seconds increase??

    And still on the stock base GT springs and Shocks. Video of the car launching is almost comical. 3.73 gear might be next, I am going through the traps in the top of third.
  4. PP2= 10ths of seconds increase??

    Stock intake and tube, no headers Lund FF 3.31. Right lane was a new SS. I was sleeping and still caught him.
  5. Data Logs Stock vs Aftermarket intake

    I data logged quite a few more times and the STFT for the stock intake were almost perfect and flowing 45lbs/min. Trapped 2mph faster with the stock intake and tube then with the Injen. Air was slightly better but not by much. I Datalogged the Injen and the stock intake multiple times and...
  6. Best CAI for lund tune?

    save the money for headers and run the stock intake for now. If you do buy one steeda or JLT.
  7. Please Do Not Run E-85 on Stock Injectors.

    I am sure Lund has sent out thousands of FF tunes... Haven't seen anyone make a post about catastrophic destruction caused by stock injectors and e85
  8. Please Do Not Run E-85 on Stock Injectors.

    Any one know how to get the IDC logged with the nGauge?
  9. Please Do Not Run E-85 on Stock Injectors.

    I have the gt350 manifold running on e85, still stock intake, exhaust manifolds with cats. DA has been bad here in AZ so I haven't seen any lean fuel trims, I did see .86 lamba when I Datalogged the other morning when the D/A wasn't complete crap. Might be tossing a couple gallons of race fuel...
  10. Please Do Not Run E-85 on Stock Injectors.

    Who at Lund didos u speak with... So much contradicting information.
  11. GT350 IM is awesome!

    Who did you buy the intake from? Any figment issues with the snorkel?
  12. Just discovered i have a vp racing fuels dealer in my area!

    Just get Lunds FF tune, I laugh when my bud pumps race fuel in his camararoooo and his bill is 80$ For half a tank.
  13. Mishimoto's 2015+ Mustang GT Silicone Induction Hose Development

    Pull the dipstick out and you can weasel your arm back there and work that bolt out. It takes time but isn't to bad.
  14. Data Logs Stock vs Aftermarket intake

    I don't know why the tune would need to be revised for a non tune intake... If you look at the logs it's plain as day, it isn't flowing as well. I suspect there is a shit load of turbulence between the filter being in the is irked path then it hits a 90 degree turn then a coupler, then the MAF...
  15. OFFICIAL MAF flow rate lb/min flow rate thread!

    Kelly I do not, but with the stock intake it pulls harder and drivability is perfect. Drivability with the Injen sucked. My wife actually turned around and dropped the car off at home because it was to jumpy for her. Won't be able to get back to the track for a couple weeks, but will update. I...
  16. Data Logs Stock vs Aftermarket intake

    Wasn't your MAF function off because of switching from the roush and that's why you had lower numbers? It is literally 4-6 lbs lower everywhere... with allegedly the same MAF diameter
  17. Data Logs Stock vs Aftermarket intake

    Correct me if I am wrong but if you factor in the short term fuel trims then it is accurate? But after talking to Lund they said if I tested the intakes on the exact same tune and one flowed less LBS/min it was an accurate test.
  18. Data Logs Stock vs Aftermarket intake

    Yes, and I don't know why my logs didn't upload
  19. Data Logs Stock vs Aftermarket intake

    I went to the race track a couple weeks back after I had my GT-350 intake installed and was pretty disappointed with the results. I ran a 12.1 at 115 which was on line with what I was running pre manifold/intake install (stock exhaust) Something was not adding up. Car was not making the power...





Top