Search results

Happy to hear that !!!! it is a drag not be able to use that active exhaust once you have it :) and even worst not to be able to change modes and getting stuck on normal. Cheers!!!

Just got to be careful on the fitment on the passenger side. There is very little space in between the active exhaust motor connection, as long as you give it enough space you will be good to go!!

Stop the hop works really well an the NVH is pretty much the same, it feels more planted and a couple of other improvements , but harshness is not one of them.

yes right after the plug I could see the exposed cables

As the man said, some nice soft drag radials will help a lot. i did not have this problem as I do have the Steeda stop the hop kit installed, it will not go any faster mind you, but it will definitely give you more confidence once that 1-2 shift gets taken care off. Probably the tires will be...

The fix was done at the shop, they solder the cables that where damaged and shrink wrapped the others that where exposed and then black taped them all of it together and re adjusted the mufflers . I believe that the recalibrating is not necessary, only when it is a new motor but It might need...

Yeah drag radials on the totally stock a10 it is and overkill, I did try them on in one pass and I swear the car insulted me lol! If good track prep is present, stock tires will get the job done. If drag prep is crap , you would probably welcome those drag radials.

Totally agree, it was not random at all of course, there is always risk when installing after market stuff. But if by any chance you get the message you will have an Idea what is going on :) , you can get some snow or go through a water puddles or get some build up around the valve like some...

Yeap! all my 6 previous mustang where manual, decided to give the auto a chance (all the hype help, off course) but, I have not miss the manual at all on this car. Maybe the reeving to say hi to the other mustangs, but that's about it. It is that good, and that drag mode, that ain't no joke :)...

In my case it was only an X pipe so I still got the factory mufflers on. Also, the problem started when the wires where expose and the short occurred. But I would not be surprised after going through this, that those who installed a cat back exhaust might of run into the same problems if the...

So ill try toe keep it short, Installed the x pipe, and headed out to the track, did not have the the JLT yet so, no tuning, but this was not the problem I had. On the way to the track I got the message active exhaust not available, I was like what? this is not a Shelby 350, I was almost at...

So took the car to the track again. I tried multiple Rpm launches 1500,1800 and 2000 and still 2.0 @ the 60 feet. Even thought its hooking good ( good track prep) no matter what i do can't break that 2.0 I think that having the stop the hop kit might be hindering me a little as I might not...

With that MPH, there is a 11.6-11.7 in there :) . A couple of questions, what size tires and rims in that drag pack ? I was about to buys a setup and those looks pretty good. What Rpm's where you launching at? Tire pressure on the rears? All this info is good to know. Again good...

As someone that uses the drag mode regularly even on the street (on the streets i do leave the nannies on not crazy) It does not get to swirly as long as you got that steering straight. It will bark the tires of course, but it is not crazy. Try it with the nannies first and then without them...

I had similar results with a 93 tune JLT and x pipe (different tuner.) My gains with the mention mods was about 27 hp and like 15 more torque. If you don't have that E-85 around, you will be disappointed with the gains. In your case is even weirder but this 2018's do not gain too much HP with...

All stock 2018 gt Vehicle, Trim & Transmission: 2018 Mustang GT Premium 400A, 3.55 A10 Auto Modifications (if any): Steeda Stop the hop and Lowering Springs. Factory 20" All Weather Goodyears Best run Drag Mode in Drive. Car # 7673 R/T...

Time slip , I will post on the list of 1/4 mile as well

Chime in as well. Definitively leave it in D in drag mode and press that track control toggle button for 7 sec or how long ever it takes to get rid of the nannies . With Stop the hop, my launches where drama free and planted so it is probably doing its job. But this cars with the 20 inch...

:D yeah that too! Returning to the track was great but, If being honest, it was nerve racking , being that it was the first 2018 to make an appearance in the track here IN PR ( we did not get the 2018's until March because of hurricane Maria) there where a lot of eyeballs on me lol. I...

O yeah, there is a lot of stuff happening at the track to distract you, officials in a hurry, the other guys doing like 3 burnouts making sure not to run over people standing around all over the place lol... So I will be working on that 60 ft next time around. Seat time will cure problems...