Search results

Hey, all. I have a new open box meth injection kit by Devil's Own. This specific version is designed to tap into the stock map sensor. I also have a neat 1 gallon fluid tank I sourced which fits perfectly on the back of the seats where I had planned to mount it. There was a bit of wait for...

They definitely are in the industry, but not so much in the mustang community, it seems. http://www.hypertech-inc.com/ I got myself two magnaflow straight through mufflers to experiment with this winter...

How much boost is the turbo making with that WG?

Mind sharing your mods, if any?

Hey! No concerns with reliability at all. - What has been a thorn in my side since day one is the inability to break traction even during a 1st gear roll. I'm not sure if this is a function of some kind of torque limiting strategy in the lower gears, or something in my configuration that is...

Can't hurt!

70k of hard full bolt on miles with 0 mechanical issues. Pennzoil Synthetic oil since the first change.

What a way to demo a product! Bravo! Good luck with the sale.

Hey! Used for about 20k miles. All is in excellent working condition. TY!

Hey! Aside from a few powdercoat chips, the brace is in perfect working condition. All hardware is included. Dims. for shipping calculations from 08619 are; 13 lbs. 45 x 12 x 5 TY!

Different mount flange, it seems

Speed Factory stopped offering them a while back. Do you plan on getting the Turbosmart (or a replica) Race Port BOV? http://www.turbosmartdirect.com/Product-Categories/Race-Port-BOVs/

Hey. Have a hot side intercooler charge pipe I'd like to sell. This is the longer pipe in the attached picture on the top. Will need a Turbosmart Race Port type BOV or can be adapted to something else if you get creative. TY!

Hello. For sale is a fully functioning CPE Delta Core front mount intercooler for the 2015-2019 Ecoboost Mustang. This is a direct bolt on intercooler without any modifications to the vehicle, unlike larger intercoolers which require removal of various components for little additional gains over...

Glad you like it! TY

Hey, all! Finally got myself a P4P and put it through its paces;

Well - went to tackle the bushing install just now, and it turns out that there is no preload on the bushings with the current front end height. Very good news as the install was going to be a pain in the ass as NightmareMoon and Norm had correctly pointed out!

I wouldn't mind less front end roll stiffness at this point in my relationship with the car!

Good option, too. what about the collars to hold the bar in place? Thanks!

Hey, all! Keep an eye on the plunger seal over time as mine had deteriorated after about 20k miles of use. The O-ring size you’re after is a BS005 (2.24mm OD / 1.8mm ID) and the material is Viton. I picked up this set from eBay.