Sponsored

Recent content by thehotrod

  1. Firewall ports

    Hmm. Sorry. It was a year ago. My son seems to have the same memory as mine. I don’t want to take it apart to look right now. It is too cold and snowy out. Later this spring I need to run another switch wire through the same spot. I’ll try to get photos then. I know it doesn’t help now. Sorry.
  2. Firewall ports

    I wish I could remember. I may have had to force it through or use a sharp object. That was more than a year ago. Good luck.
  3. Firewall ports

    yes. I have. I don't have my car right here to look, but I know there is a rubber grommet/port way up high on the passenger side. I poked a coat hanger from the inside of the car out, and then I removed the passenger front tire and fender liner and I was able to get the wire up from there...
  4. Is battery trim cover worth the 100$?

    Yes they work great. And I love that I can easily remove them and remove the cover and replace as needed.
  5. Is battery trim cover worth the 100$?

    Tell me more about this battery management system. I have my subwoofer and underglow lights with inline fuses connected directly to the battery. What harm would that cause? The inline fuses are close and tucked into the battery box, under my cover. (For the battery cover discussion, I bought...
  6. Can I run 275/40/20 on the front with 305/35/20 in the rear?

    315/35r20 on rear of my 2018 caused rubbing on bumps. I had to put two 3/8 steeda spring spacers in to prevent the rubbing. The closeup of the wheel is before spacers and it would rub on bumps and the picture of the car is after 2 spacers...no more rubbing. And I have 275/35r20s on the...
  7. Bolts backing out/ broke

    FYI, I tried an easy out....but like buldawg said, because the subframe member was in the way, it was very hard. I ended up taking it to the dealer. I know I could have found some shop that was cheaper to do this, but I felt so helpless and I didn't want to screw up the frame. Anyhooo, 10...
  8. Bolts backing out/ broke

    How did you get your bolt out of the subframe. I snapped one off on my s550 using my new impact wrench. Who knew. Now I'm screwed.





Top