Recent content by jjsotolongo

Bump for second price reduction

Bump for new price

Hi Mallet, I am not interested in splitting the set up. You could of course buy them all and sell the fronts yourself to save me the trouble :wink:

Oh almost forgot sizes: Tire fronts are 285/35R19 Tire rears are 325/30R19 Wheel fronts are 19X10 Wheel rears are 19X11

Update: Price is now 1850 for the set. Hey folks! Selling these as I will be selling the Mustang soon. They were bought May of 2025 and have about 1500 miles on them. Asking 1850 for the wheels, tires, black wheel lugs, TPMS sensors, and the ford programming tool. This is a...

There’s a lot of folks saying PD due to the wide gear ratios in the MT-82 D4; which is true but also OP has a Mach 1 which comes with a Tremec. It has 1:1 in 5th and much closer ratios. Both are good choices and ultimately comes down to what you want to do with the car. PD will make the car...

Apex SM-10’s. Dropped on Steeda Sports.

As to the tire size debate: there is a lot that goes into this. “Generally” the best performing tire will have tread width around 90% of wheel width. This means that for a 10” tire the best handling size will indeed be 275. However this does -not- mean that going to a 285 of a smaller series...

Here are some more fitment pictures:

Thanks! The front does not rub at all. I forgot to mention I also added the Steeda steering wheel lockouts for extra protection at full-lock. It was a $20 cheap insurance part. Same as the spacers that I got from Apex: a cheap insurance part. The wheels came with center caps. I did not test if...

The pic outside is from when I first put them on. Other two are of the rear of the car that I took right now.

Yes, I put the spacers on without lengthening the lugs. Keep in mind these are only 5mm aka .2 of an inch. They are very narrow and just give an extra bit of breathing room. Most people who talk about extending lugs are using a one inch spacer to fit a 11” offset rear wheel on the front for...

I have 285/35r19 up front and 325/30r19 out back. Apex wheels with your measurements and dropped on Steeda Sports. The only thing that was really tight was the front wheel to front Strut clearance. I put 5mm spacers up front. the upper clearance at both ends is fine and rear clearance had no...

It was a brand new set of tires. The shop is putting a claim in through Continental’s warranty.

Hey folks so I have an update. I just got back from getting under the car. Managed to beat the South Florida rain by a few minutes. I can confirm that rubbing was not the issue. I still have the driver-site wheel on and it doesn’t rub on anything. The clearances are close at steering wheel...