Sponsored

Recent content by Greg94

  1. Cheapest way to make duplicate key

    Thats not a bad price. My remote was $90 from Ebay. Plus the price to program. Also I forgot to add that ACE would not program a customer provided fob where as Batteries Plus did.
  2. Cheapest way to make duplicate key

    Buy the correct replacement fob and take to Batteries Plus . They charge me $89 to program. I went to ACE 1st but they only would do it on weekdays. Hope this helps. My car is a 15.
  3. 2017 GT Base Performance Pack?

    That is a good looking car. To add my 2 cents, The door panels also support a base model, While the seats, or the leather covers are from a 2018 and up model year. The pattern in the front seats is the giveaway here.
  4. Amount of fluid for complete brake line flush

    One more thing. Be sure it is DOT4 LV. The LV is for light viscosity. I initially did DOT4 then realize my error, and redid it again.
  5. Baer Eradispeed rotor clearance - rear Was the Wheel Hub bearing, not the brakes

    I have them with the base GT brakes and calipers. The rear would be the same as yours. No issues. I would double check everything as a precaution.
  6. Exhaust question.

    Yes 2.5 inch. This is the route I am taking. 3” catted down pipe to y-pipe. No resonator. The rest would be all GT including the mufflers as I want it to remain quiet. The hardest part is getting it home as I do not have a truck. A sawsall should fix that issue. Also the GT muffs...
  7. Exhaust question.

    Not sure about any potential flow interruption, however what about sourcing a GT takeoff system to replace everything 2.25 in size. Should be a very cost effective option.
  8. STOCK SPRINGS AND DAMPER RE-INSTALL .

    When correcting your springs make sure you don’t install the rear ones upside down as well.
  9. Shift light?

    Premium 2015 and mine does it as well. Oh and 6 spd automatic.
  10. Print/PDF of Window Sticker?

    Try.....fordshowparts.com. About 25 bucks thou.
  11. 2018+ EB owners - question about part near IC

    Cobra, I know you mention 18... however my 15 had it and was similar to a rubber bladder type material. Mine divided flow between intercooler and ac condenser above. It attaches to front impact bar. My car did not come with shutters and I removed it due to a larger intercooler install...
  12. Decklid emblem broke off.

    Mine did that. It is a 2015 anniversary badge. Its a little larger than several other available badges back there. It is held on by plastic weld. It will break off eventually, especially in hotter climates. I used silicone to secure mine back as that was in the tool box. I was...
  13. Is it possible to have the hard plastic door panels covered in a soft material...

    You could try eBay or the salvage yard. My 2015 premium has soft touch door panels.
  14. Boost Guage

    Early and mid year 15 models only go to 20psi.


Top