What did you do to your S550 Mustang today?!

[Ballistica]

Dumb question I know but how do you get the car up high enough to sit on the blocks?

Not a dumb question at all. My jack lift is tall enough to get the car up high enough to fit on two sets of blocks. I have to use an adapter to get it high enough to fit on additional sets.

I jack it up, fit one set, move to the other side, repeat the process until it’s high enough.

Sponsored

 

[2016S550]

Not a dumb question at all. My jack lift is tall enough to get the car up high enough to fit on two sets of blocks. I have to use an adapter to get it high enough to fit on additional sets.

I jack it up, fit one set, move to the other side, repeat the process until it’s high enough.

Thanks, do you have jacking rails or do you use two jacks and lift one side at a time or front then rear?

 

[SuperSnake2Go]

I don’t like black cars my friend, but that car looks fucking killer. Thank you.

Much appreciated! I’ve always loved all black but so hard to keep clean!

 

[gone_n_60]

Nothing incredible but installed my Christmas gift, an Injen CAI.

 

[Vegas5OH]

Had an fittings welded on gt500 cam covers and installed. I made the catch can port on the passenger side the oil return for my turbos instead of the oil cap which is nice.

 

[Ballistica]

Thanks, do you have jacking rails or do you use two jacks and lift one side at a time or front then rear?

I have the Steeda jacking rails which makes it much easier for sure. Able to get both wheels off the ground at the same time if I have it centered correctly.

 

[Roofhopper]

Put a K&N Blackhawk CAI on a couple weeks ago, and cleaned her up a bit today

 

[stannypack]

Got the ford performance tune installed as well as a new shift knob that's slightly weighted and feels way better now

 

[Biggsy]

Prepping for track season and event this weekend.

Over the weekend I sanded the rotors and took the front struts out to switch to steeda camber plates.

Today put on Pagid RSL29 on the rear and changed oil.

Tomorrow will be mounting new Kuhmo v730s on my wheels and putting on the front pads in addition to bleeding brakes.

Steeda camber plates installed

 

[Stallone]

interior provided with splashes of paint

 

[Mach VII]

Steeda camber plates installed

Why did you switch to the Steeda plates?

 

[Biggsy]

Why did you switch to the Steeda plates?

Trying to see how much more camber I can get If any

 

[Yorkshire_OH]

Fitted a trunk pop kit from Steeda

 

[DadzMach]

This Z.?

anothher pic.. Wolf in sheep’s clothing..

That is SICK!!!

 

[Biggsy]

Steeda camber plates installed

Picked up tires. Kuhmo v730 305/30/19
Brake bleed all around and put on Pagid RST 3 on the front.
Currently waiting for alignment.

Track day tomorrow

Sponsored