COPLUS LIGHT HELP

[Harebear72]

Hello all and wonder if anyone can help me.

I have a set of the Coplus front indicator lights that I bought a couple of years ago via the company that Gibbo works for. these have been fitted for the last couple of years and no problem.

a few nights ago I was at a set of lights and noticed via a reflection from the car in front that one side the white light was flickering, by the time I got home the complete unit with the white light was all out, however the orange indicator was working fine - the other side is working perfectly well.

Now has anyone had this sort of a problem or have any ideas ??

At the weekend I was planning on taking a look at the wiring to see if any damage but the fact the indicator works makes me think that perhaps the white led could be knackered ??

Any help or ideas appreciated and I look forward to a dry weekend to be able to get under the car to check out.

Sponsored

 

[GR11M]

wtf I was about to say Gibbo works for overclockers.co.uk but it turns out they actually sold Mustang indicators

 

[Harebear72]

You are correct, Gibbo works for Overclockers.

If my memory is correct, I seem to remember that Gibbo wanted these for his car but were too expensive and he managed to do a deal through overclockers that they bought a load in bulk and then sold them for a little profit.

 

[Chappers]

Hello all and wonder if anyone can help me.

I have a set of the Coplus front indicator lights that I bought a couple of years ago via the company that Gibbo works for. these have been fitted for the last couple of years and no problem.

a few nights ago I was at a set of lights and noticed via a reflection from the car in front that one side the white light was flickering, by the time I got home the complete unit with the white light was all out, however the orange indicator was working fine - the other side is working perfectly well.

Now has anyone had this sort of a problem or have any ideas ??

At the weekend I was planning on taking a look at the wiring to see if any damage but the fact the indicator works makes me think that perhaps the white led could be knackered ??

Any help or ideas appreciated and I look forward to a dry weekend to be able to get under the car to check out.

sounds like the LED has blown, depends on how good your electrical knowledge is you could try and take them apart review the LED for type then buy a new one and solder it on the board, or if that's too much hassle then unfortunately its a replacement job.

i've bought the same ones from Gibbo too on overclockers and still going strong!, i've also got Coplus' DRL and fogs for the pony.

Sponsored