Question About 25MM Spacers

[enzo101]

So lets say hypothetically I get a R, maybe. I was looking at P6GR wheels and would want to do a 305 square setup for daily use. I talked with Alex, great guy, and he said I'd need to do a 25mm spacer on the front. Is this true since the stock wheels are already 305 in the front?

Sponsored

 

[krt22]

Its not the tire its the offset of the wheel. For a 19x11 square setup its a ~50mm offset needed for the rear and then the 25mm spacer up front to get close to the factory R offset of 24mm.

 

[firestarter2]

Spacers for suspension/brake clearance so yes.

I think you can actually run a 35 - 40 if you are running 2 degrees negative camber.

 

[Osvic@N4SM]

Yes you would have to run a 25mm spacer!

So lets say hypothetically I get a R, maybe. I was looking at P6GR wheels and would want to do a 305 square setup for daily use. I talked with Alex, great guy, and he said I'd need to do a 25mm spacer on the front. Is this true since the stock wheels are already 305 in the front?

 

[nastang87xx]

Spacers for suspension/brake clearance so yes.

I think you can actually run a 35 - 40 if you are running 2 degrees negative camber.

I think 35 is acceptable if you're pushed in but might as well get the big boy at that point.

 

[enzo101]

Perfect! Thanks guys!

 

[Osvic@N4SM]

Hope to have you join the family soon!!

Perfect! Thanks guys!

 

[enzo101]

Hope to have you join the family soon!!

Same!!!!

 

[Need4SpeedMotors]

So lets say hypothetically I get a R, maybe. I was looking at P6GR wheels and would want to do a 305 square setup for daily use. I talked with Alex, great guy, and he said I'd need to do a 25mm spacer on the front. Is this true since the stock wheels are already 305 in the front?

Hey Brother,
Here is a link to a GT350 who did the 19x11 +50mm squared set up.

https://trackmustangsonline.com/threads/rotatable-gt350-square-wheel-tire-setup.11591/

On the GT350 you would need to change the studs to longer ones. I believe that on the GT350-R, you should not need to use the extended studs as the OE studs are pretty long. I would have to do some more research to confirm.
We can work together to figure it out. :cheers:

Reach out to me if you have any questions brother.

Alex
818-547-5474

 

[enzo101]

Hey Brother,
Here is a link to a GT350 who did the 19x11 +50mm squared set up.

https://mustang6g.com/threads/rotatable-gt350-square-wheel-tire-setup.11591/

On the GT350 you would need to change the studs to longer ones. I believe that on the GT350-R, you should not need to use the extended studs as the OE studs are pretty long. I would have to do some more research to confirm.
We can work together to figure it out. :cheers:

Reach out to me if you have any questions brother.

Alex
818-547-5474

Hey man! I was just double checking because I couldn't figure out the spacer thing for the life of me! I will give you a shout very soon!

Sponsored