GT Chin Spoiler on Ecoboost

[Elvis66]

No worries ..you still can..but your gonna have to get that inside part .. go on eBay and probably get one for 50 bucks

Sponsored

 

[Elvis66]

If you look see the top? It snaps inside the bottom of the bumper cover ...yours is missing that part

 

[Manders Mustang]

No worries ..you still can..but your gonna have to get that inside part .. go on eBay and probably get one for 50 bucks

I'm in England, will take the piss to get one of those sent over lol...

 

[Manders Mustang]

If you look see the top? It snaps inside the bottom of the bumper cover ...yours is missing that part

Yeah can see, will the bolts not hold it?

 

[Elvis66]

You would have to drill more holes and would not be very strong without it ..I would not recommend it without it

 

[Manders Mustang]

You would have to drill more holes and would not be very strong without it ..I would not recommend it without it

Damn.... didn't think it'd need more holes...

This is proving to be more of a **** that it's worth, half tempted to just remove the shitty little crap spoiler the eco comes with and have that sprayed :rant::rant:


I've asked two of my mates who changed front spoilers if they've got the brace still, one has the roush front fascia with roush splitter, the other a cervini splitter.

 

[Elvis66]

You get that part though everything should be downhill

 

[Manders Mustang]

You get that part though everything should be downhill

Get that part, place it on, fit extensions/spacers to the belly pan (how thick??) and then bolt it all up?

 

[Elvis66]

The thickness of the Tupperware lid is about the same as the belly plate..trim the front of the belly plate ..thats,about it ..when your ready I'll help you walk through it

 

[Manders Mustang]

The thickness of the Tupperware lid is about the same as the belly plate..trim the front of the belly plate ..thats,about it ..when your ready I'll help you walk through it

Cheers chap Should have one Saturday I hope

 

[Chef jpd]

Damn, this thing seems like it's going all pear shaped!

 

[Manders Mustang]

Damn, this thing seems like it's going all pear shaped!

It is lol! Probably should have checked before getting it sprayed, but thanks to [MENTION=26474]Elvis66[/MENTION] think we'll be able to get this sorted....

 

[Manders Mustang]

[MENTION=26474]Elvis66[/MENTION] [MENTION=22912]Chef jpd[/MENTION] either of you got the part number for the splitter, turns out the guy who I thought had one... threw it away!

 

[fordguys550]

im getting ready to do this on my v6. i'll let you guys know how it turns out

 

[Chef jpd]

[MENTION=26474]Elvis66[/MENTION] [MENTION=22912]Chef jpd[/MENTION] either of you got the part number for the splitter, turns out the guy who I thought had one... threw it away!

Are you buying another splitter?
If so, get a California Special Splitter, it bolts right up to an EB PP belly pan.
Here is a pic of it on my car.

Part number is GR3Z-17626-AA
It will make your life easy and here is a build thread
http://www.mustang6g.com/forums/showthread.php?t=50994

Sponsored