Anyone with Niche Essen wheels?

[OxfordPP]

So with the 275/35 on the front with the +40 did it still rub or is that only with the 275/40?

Sponsored

 

[ronnieb1958]

Niche essen m147

20x10 et 40 plus 3 mm spacer upfront to make sure thencap fits right.

275/35/20 & 275/40/20 mockey thompson street radial 2

will a spacer be needed for a 19x10, 275/40/19 set-up because i want a no mod fitment...

 

[ronnieb1958]

Mine

how's the ride with those 20's and Steeda springs?

 

[WKT]

So with the 275/35 on the front with the +40 did it still rub or is that only with the 275/40?

No rubbing with 275/35 on the front, only rubbed with 275/40 on the front.

Ronnieb1958,
Rides great with the Steeda Progressives and the 20's, it is firmer than stock but still rides good and comfortable. I don't like a rough riding car, my sons 99 GT with lowering springs rides rough, but my 2015 does not, I would not go back to stock.

Also, as far as a spacer for the center caps to fit correctly, I think that is only with the 20's. Paul at N4SM can answer that correctly.

 

[Need4SpeedMotors]

will a spacer be needed for a 19x10, 275/40/19 set-up because i want a no mod fitment...

19x10 works no need for spacers, 20s are the only wheel that needs a 5 mm spacer upfront due to the concavity of the wheel for the center cap to fit on snug.

 

[GThunder]

Hey guys, I'm actually looking at picking these wheels up in 10x20 square as well. If I'm running MPSS tires should I be looking at a 275 width or a 285 width? not 100% sure if they run a bit narrow or wide so any feedback would be much appreciated. My goal is to have the rim flush with the tire. Not a fan of stretch or bulge.

Your cars look great with these wheels btw!

 

[Need4SpeedMotors]

Hey guys, I'm actually looking at picking these wheels up in 10x20 square as well. If I'm running MPSS tires should I be looking at a 275 width or a 285 width? not 100% sure if they run a bit narrow or wide so any feedback would be much appreciated. My goal is to have the rim flush with the tire. Not a fan of stretch or bulge.

Your cars look great with these wheels btw!

20x10 ET 40 youll need a 5 mm spacer upfront for the cap to sit on properly.

Either or will work depending on whats available.

 

[Ericc B]

I forgot to post pictures of mine here :doh:

- Front 9J20 ET25 with Michelin PSS 255/35/20
- Rear 10J20 ET40 with Michelin PSS 295/30/20

 

[Need4SpeedMotors]

Looks great man.

 

[GThunder]

Looks great. I like the polished look on the yellow!

 

[Need4SpeedMotors]

Thats actually a regular hyper silver type of finish on the wheels brotha.

 

[Ericc B]

Thats actually a regular hyper silver type of finish on the wheels brotha.

Correct, but the top part of the spokes plus the edge are machined.

 

[Need4SpeedMotors]

Correct, but the top part of the spokes plus the edge are machined.

Correct sir.

 

[Spartanator]

Correct sir.

Is there a way to modify the center cap to fit without running actual wheel spacers? I'd like to run the 20x10's (40mm ET) with 285/35/20 on all 4 lowered on Eibach Sport Lines. I wouldn't mind running the 19x10s (40mm ET) with 275/35/19 on all 4.

Sorry to dig up an old thread, better than creating a new one....

 

[Grintch]

I just noticed yesterday that the n4sm was showing the 19x10 for both front & rear fitments on the PP.

So is there an issue at the front or not.

Sponsored