MRR FS02 Color Choices

[Vader]

So I am getting a set of the FS02's now I need help on deciding a color or just sticking to the silver. Posting a poll, feel free to choose one color. Thank you. Cannot wait to get my set!!!
1.Blue

2.Green

3.Orange

4.Red

5.Silver

6.Teal

7.True Blue

8.Yellow/Green



screen grab

Sponsored

 

[WHITE HOT]

I would go with red (4) and the silver looks nice too

 

[Chameleon]

Silver.

 

[Clink]

Silver w/black calipers

 

[MRRDesignWheels]

Vader !!! nice , and thank you for your support, I will start the process on your order
maybe ill add some pics here just to show the process for everyone.
this project is going to be real good.

 

[MRRDesignWheels]

Order is in

Guys here is one of the first steps, kind of the most borring part... paperwork lol, but here is the order.

looks like we are doing a 20x10 front and 20x11 rears,.
for now lets help Vader pick a color.

( By the way guys pay attention to the time line, when we say we are the fastest in the industry...well we mean it )

 

[Vader]

Guys here is one of the first steps, kind of the most borring part... paperwork lol, but here is the order.

looks like we are doing a 20x10 front and 20x11 rears,.
for now lets help Vader pick a color.

( By the way guys pay attention to the time line, when we say we are the fastest in the industry...well we mean it )

"tears of joy" lol thanks again Carlos, you the man!

 

[Vader]

I decided to do a quick edit, looks more like a black chrome to me.

photo host

 

[Chris796]

teal, silver or grey

 

[MRRDesignWheels]

teal, silver or grey

I voted teal

 

[MRRDesignWheels]

FS02 flowforged

So I was going to wait to post but i promised real time pics.
I just went out to the warehouse and the guys pulled a few sets out for us, including Vaders set.
Picture below shows his order

Getting the wheels out for a quick inspection

Back in the boxes and on its way to our CNC department, I had to do a quick stop as I noticed our installer was finishing up a set of FS01 wheels.

Excuse the mess but trust me when I say this, if your CNC department is spotless then you dont have enough work plain and simple.

 

[Gibbo205]

Weigh them and also I replied to your email, I wanna pay for my set.

 

[MRRDesignWheels]

Weigh them and also I replied to your email, I wanna pay for my set.

done buddy ill get your paper work moving, I will be checking the weights but i need to wait until the wheels are fully machined, right now the back pad has a gang of aluminum as its low almost 0 off set, ones we do the specs it will give us a accurate weight.

 

[Need4SpeedMotors]

I say Green, but thats just me.

 

[MRRDesignWheels]

Wow the CNC department is kicking butt !!

So..... Here we are, currently is 3:40pm on my side of the world and looks like our CNC department has been working real hard today, check out the status.
Picture below shows Vaders FS02 mounted up and aligned on our Hass CNC ready to get the proper off sets and center bores completed.

This picture shows the FS02 completed off sets and a 70.5 center bore direct mustang fit

Here is the FS02 already on our step 2// getting that PCD all squared away

Just want to give everyone a little inside look// so when someone tells you is 5-6 weeks to complete your order hmmmm yeah right....... well in exception to Full forge or multi piece.

Sponsored