Sagacity
M6G SoCal Cruisers
- Joined
- Feb 13, 2015
- Threads
- 43
- Messages
- 309
- Reaction score
- 195
- Location
- San Diego
- Website
- www.youtube.com
- First Name
- Matt
- Vehicle(s)
- 2015 Mustang LE, Kona Blue #146, Manual
- Thread starter
- #1
Just finished my OPG, Crank Sprocket, ATI damper and whipple install but ran into a snag. I have an error code for high coolant temp. This appeared before I even started the car for the first time after flashing the PCM and finishing the install. The car starts, runs fine and sounds good but I think I have a loose plug somewhere that is throwing this code. I've tried clearing the code and restarting the car but it pops back up.
The code is P1289 Cylinder Head temp.
Problem Solved.
Connector was unplugged on the back of the passenger side engine block.
The code is P1289 Cylinder Head temp.
Problem Solved.
Connector was unplugged on the back of the passenger side engine block.
Sponsored
Last edited: