Whipple guys with 20 percent od and 2.8 oor 3.0 pulley

[BMR Tech]

Sorta OT, but are you switching over a to a whipple with your new combo, or sticking with the TVS?

I swapped to a Whipple 2.9L Front Feed system.

I was spinning the TVS to around 27K rpm.

So I decided to test out the Whipple this time around. :cheers:

Sponsored

 

[Adaraas]

I swapped to a Whipple 2.9L Front Feed system.

I was spinning the TVS to around 27K rpm.

So I decided to test out the Whipple this time around. :cheers:

Coolio.

 

[sonic]

I swapped to a Whipple 2.9L Front Feed system.

I was spinning the TVS to around 27K rpm.

So I decided to test out the Whipple this time around. :cheers:

 

[pro 5.0]

OP step 1 ditch the manual trans you will pick up 6 - 7 tenths just in an auto swap with the right converter.

 

[doodguy]

OP step 1 ditch the manual trans you will pick up 6 - 7 tenths just in an auto swap with the right converter.

Maybe one day. For now having fun with manual.

 

[pro 5.0]

Maybe one day. For now having fun with manual.

I hear you on the manual being fun choosing what gear you want to be in and what not but as for getting an ET at the track AUTO is the only way to go.

 

[jhatley7]

Maybe one day. For now having fun with manual.

x2 900+ with a clutch is just so much fun!

 

[alrodri8]

OP step 1 ditch the manual trans you will pick up 6 - 7 tenths just in an auto swap with the right converter.

Dont do it! Stick shift all the way!

Sponsored