VMP Odin/Loki Wait?

[yismoh]

So I tried using washers on the hood studs but with no success. The blower still rubs. I took some black putty/sticky tack and placed on blower where it is making contact and shut the hood just so it is resting/ engaged on the latch to get an idea of how much the putty got squished and its significant.

Great info , So we need to think about modify the hood . You don’t have any issues after change the front grill?

Sponsored

 

[JLTH2183]

Great info , So we need to think about modify the hood . You don’t have any issues after change the front grill?

The only issue other than the hood clearance is on first cold start up. At random I'm getting a bucking/ rpm fluctuation that goes away after a minute that I've been trying to datalog. The car pulls like a monster. With traction control on its spinning the tires easily even in 3rd gear. I have not tried driving the car with traction control off. With my stock upper grill the car drives perfect at cruise, guess I have to sell my old upper MMD grill.

 

[JLTH2183]

Got a tune revision last night and uploaded to car and some data logs. Crossing my fingers. Keep you posted.

Trying to decide if it's worth going from 275s to 305s with the same tires I'm running now MPSS or keep the same wheels and run nitto nt555rii

 

[Gsus32]

I’m dropping off my car today for the install, I’ll post how the hood fitment is on the 18+cars

 

[yismoh]

Got a tune revision last night and uploaded to car and some data logs. Crossing my fingers. Keep you posted.

Trying to decide if it's worth going from 275s to 305s with the same tires I'm running now MPSS or keep the same wheels and run nitto nt555rii

Nice!! I bought on teambeefcake the pp1 rear wheels 19x11 to fit the 305 rii.

 

[JLTH2183]

Anyone have Steeda adjustable motor mounts with the red bushings installed, any noticeable increase in NVH? I want to find a solution to my blower rubbing the underside of the hood. Does installing lower engine mounts change the driveshaft to differential angle? What about installing longtubes down the road later? Does it make the install easier or worse with aftermarket mounts installed?

 

[JLTH2183]

Nice!! I bought on teambeefcake the pp1 rear wheels 19x11 to fit the 305 rii.

Nice, what offset? 50mm? Website doesn't say. Does the Ford wheel cap fit ?

 

[yismoh]

https://www.beefcakeracing.com/mrr-dg38-19x11b/

 

[JLTH2183]

https://www.beefcakeracing.com/mrr-dg38-19x11b/

Nice do you have picture of wheel/tire installed on car? Did you need to use a spacer? Is it flush with the Body or is it poking out some?

 

[yismoh]

No, I don’t have any photos, I will install all this weekend but you can see same specs rear wheels here with 305/35/19

https://lmr.com/item/WK-188912A/sve-mustang-sp2-wheel-kit-19x10-11-gloss-black-15-19

 

[JLTH2183]

No, I don’t have any photos, I will install all this weekend but you can see same specs rear wheels here with 305/35/19

https://lmr.com/item/WK-188912A/sve-mustang-sp2-wheel-kit-19x10-11-gloss-black-15-19

Thank you I went ahead and ordered those replica 19x11 wheels as well. I also pulled the trigger on Steeda motor mounts, I'm tired of the hood rubbing. Hopefully get them in a week or so, everything in the world is on back order it seems.

 

[yismoh]

Thank you I went ahead and ordered those replica 19x11 wheels as well. I also pulled the trigger on Steeda motor mounts, I'm tired of the hood rubbing. Hopefully get them in a week or so, everything in the world is on back order it seems.

The wheels arrived 2 days after the order (to PR)

I also bought the steeda rear camber ajustable, that was backorder like 1 month.
Please leave me a review of that engine mount after installation.

 

[JLTH2183]

The wheels arrived 2 days after the order (to PR)

I also bought the steeda rear camber ajustable, that was backorder like 1 month.
Please leave me a review of that engine mount after installation.

Okay will do. Thanks for your help finding me some new replica rear wheels. Less hurt on the wallet vs buying 4 new wheels and 4 new tires

 

[yismoh]

Okay will do. Thanks for your help finding me some new replica rear wheels. Less hurt on the wallet vs buying 4 new wheels and 4 new tires

Testing

 

[fuelforfire87]

Nice!! I bought on teambeefcake the pp1 rear wheels 19x11 to fit the 305 rii.

No, I don’t have any photos, I will install all this weekend but you can see same specs rear wheels here with 305/35/19

Didn't know they made these. Will definitely look into getting a set since I really like the look of the PP1 wheels.

Sponsored