Valve Stem hitting front caliper

[Crais]

I bought Stance SC-6ix wheels, 20x10 et35 (front), with 5mm spacers to clear the center cap. These wheels have the valve stem near the center of the wheel instead of toward the rim.

When I put the first one on to test fitment the valve stem hit the caliper. It looks like the stem sits about 1/4" into the top and bottom sections of the caliper. Any of you ever run into this problem?

Sponsored

 

[Need4SpeedMotors]

I bought Stance SC-6ix wheels, 20x10 et35 (front), with 5mm spacers to clear the center cap. These wheels have the valve stem near the center of the wheel instead of toward the rim.

When I put the first one on to test fitment the valve stem hit the caliper. It looks like the stem sits about 1/4" into the top and bottom sections of the caliper. Any of you ever run into this problem?

certain wheels have this occur based on the location of the tpms, got the solution for you and sending it out for you brotha.

 

[Crais]

Thanks a ton for your help. You've been awesome!

 

[Need4SpeedMotors]

Thanks a ton for your help. You've been awesome!

The least I can do brotha

 

[Phelix]

I also need help! What's the solution? Spacers?

 

[Need4SpeedMotors]

I also need help! What's the solution? Spacers?

Is it the same wheel?

Sponsored