papinist
The Italian Pony
- Joined
- Nov 30, 2014
- Threads
- 47
- Messages
- 3,188
- Reaction score
- 781
- Location
- Tuscany, Italy
- First Name
- Stefano
- Vehicle(s)
- Mustang EcoBoost MT Race Red EURO - NO MORE
- Thread starter
- #1
IMPORTANT: If you don't see the images, try installing this chrome extension: https://chrome.google.com/webstore/...ed-fix/naolkcpnnlofnnghnmfegnfnflicjjgj?hl=it
It's a temporary solution until I have time to upload pictures to some other hosting site. Thank you!
Since I decided to do the front tribar led mod, I thought that I can save on time and costs to do both front and rear mods, since also for taillights there is a great mod!
INDEX
1. Preparation (below in this post)
2. Installation (part 1) (part 2)
3. Videos (night) (daylight)
WHAT'S THIS?
It's basically a replica of US taillights, so the three bars will light in sequence from inner to outer bars, to show that you are turning, but with amber leds instead of red (trying to be legal )
Also it enables brake lights on all three bars instead of only on the two inner ones.
PLEASE NOTE that I already installed red vinyl on my taillights, otherwise they are clear, not red (thread on vinyl installation HERE)
1. PREPARATION
I started with setting my usual workplaces with lights
As always, I described all the process in a separate thread, easier to find when searching the forum
>>> How-To: Remove taillights <<<
So I ended this way
:eyebulge:
But finally have all my lights out, and in a few days I should get them ready and begin to reinstall! Yeah!
It's a temporary solution until I have time to upload pictures to some other hosting site. Thank you!
Since I decided to do the front tribar led mod, I thought that I can save on time and costs to do both front and rear mods, since also for taillights there is a great mod!
INDEX
1. Preparation (below in this post)
2. Installation (part 1) (part 2)
3. Videos (night) (daylight)
WHAT'S THIS?
It's basically a replica of US taillights, so the three bars will light in sequence from inner to outer bars, to show that you are turning, but with amber leds instead of red (trying to be legal )
Also it enables brake lights on all three bars instead of only on the two inner ones.
PLEASE NOTE that I already installed red vinyl on my taillights, otherwise they are clear, not red (thread on vinyl installation HERE)
1. PREPARATION
I started with setting my usual workplaces with lights
As always, I described all the process in a separate thread, easier to find when searching the forum
>>> How-To: Remove taillights <<<
So I ended this way
:eyebulge:
But finally have all my lights out, and in a few days I should get them ready and begin to reinstall! Yeah!
Sponsored
Last edited: