Streetfighter Oil Separator Special

[Streetfighter Mustang]

Special
Mustang Oil Separators

Normally $495 Pair / August Only $465 Pair

Buy Online


Over the last 10 year after removing countless plenum covers on the Coyote engine in our Australian Fords ,and now the new Mustang we have noticed oil build up in the manifold and plenum areas.</SPAN>
This oil contaminates the incoming air bringing oil into the combustion chamber.
The results of this are oil usage and contaminated air/fuel mixtures.

If Supercharged and intercooled this oil builds up around the heat exchanger fins and tanks causing less cooling efficiency for the incoming air. On a supercharged engine this is especially important.

This need led Streetfighter to engineer and manufacture oil and air separators.
The separators are easily fitted in line with the engine breathing system.

The oil is caught in the separator filters rather than contaminating the intake and air fuel mixture with unwanted oil.
When the engine is not running the oil caught in the filters drains back down into the sump rather than the manifold.
This keeps the intake system and intercooler clean by stopping the unwanted by-pass oil burning through the engine.
Less oil usage and the intake and intercooler is always working at is best.

Not only do they serve a purpose but they enhance the look of your engine bay with a racey OEM style finish.

We have manufactured our Streetfighter breathers out of billet aluminium and utilise high quality washable filters to ensure life time reliability. All Australian made.

The Streetfighter breathers are sold as a pair and will be ready for release next week.

Suits all 5.0 Mustangs 2014 -2017 world wide / Naturally aspirated and supercharged.

Streetfighter Oil Separators kit Price

Normally $495 pair / August Only $465 pair

Buy Online

Available direct from Streetfighter

[email protected]

Streetfighter Oil Separators / Suits all 2015-2017 5.0 GT Mustangs

2016 Mustang 5.0 Naturally Aspirated

2016 Mustang 5.0 Supercharged

Sponsored

 

[Bagration]

Hi there

Can I ask whether this is in place of an oil catch can? If so what would be the pros and cons of this enhancement versus a catch can (assuming that my understanding is right).

Cheers Paul

 

[-Armoured-]

Will the sponge need to be replaced ?

 

[Streetfighter Mustang]

Yes, the Streetfighter Oil seperators eliminate the need for a catch can.

The pros are that the by-pass oil is caught in the oil separator filter while the engine is running.
The separators will allow PCV air to pass while catching the oil.
When the engine is not running the oil slowly drains back into the engine.
Unlike a catch can, this eliminates the need to constantly service or drain the catch can.
It also reduces the oil level needing topping up due to the oil returning to the engine and not being discarded.
Servicing/ or replacing of the oil separator filters is done on engine oil service schedules.

A catch can simply catches the oil and holds it in the catch can. It then need to be drained so it doesn't overfill.

Sponsored