Post Pix of your S550 with aftermarket wheels and tires

[Ronnoc]

:lol::lol::lol:

I cant believe you noticed that.

I had to go back to the picture to see if it was dirty.

The car was so damn clean and the rims looked so badass, I didn't notice.

LOL, my car was covered in dust and did a last minute wipe down with detail spray before the photo. Ran out of clean cloths to get to the windshield :headbonk:

Sponsored

 

[VibeMotorsports]

Forged 7 Spoke Design on a GT350R.

​

 

[Madtwos]

Forged 7 Spoke Design on a GT350R.

​

Those look amazing!!! Noob question here... How do you get the tire to stick out and protect the rim like that?

 

[VibeMotorsports]

Those look amazing!!! Noob question here... How do you get the tire to stick out and protect the rim like that?

The front doesn't really stick pass the fender, the rear does a poke a slight because of the 325/30/19 on the GT350/R but does not rub.
Here are the specs for your 18" GT 19x10 19x11 or 20x10 20x11
for the R Spec is a 19x11 19x11.5 fitment.
The wheels are protected with the nice Tire Sizes you can run brother.

 

[Madtwos]

The front doesn't really stick pass the fender, the rear does a poke a slight because of the 325/30/19 on the GT350/R but does not rub.
Here are the specs for your 18" GT 19x10 19x11 or 20x10 20x11
for the R Spec is a 19x11 19x11.5 fitment.
The wheels are protected with the nice Tire Sizes you can run brother.

Thanks. I failed to be clear in my question. I didn't mean stick out from the fender. Im talking about the lip of the rim where the rubber of the tire hugs around it. So if you were to go into a pot hole or tap a curb the lip of the rim would be some what protected from minor curb rash. My tires now are like that and it gives me confidence when driving on crappy roads.

 

[949Racing]

Just released 19" 6UL's in Beryllium finish. Visit the full website for more info or ask questions here. Mobile site is simplified (no specs). http://949racing.com/

• Flow Formed
• Low pressure cast
• T-6 Heat treated
• VIA certified 770kg max load rated (10% above industry standard)
• Knurled bead
• Double valve

19x10 +37 23.8 lbs
19x11 +50 24.7 lbs
19x11 +24 25.6 lbs
19x11.5 +56 24.8 lbs

 

[Ryan P]

Available now?

 

[949Racing]

Available now?

If you are asking us, we are taking pre-orders for the first small batch arriving early June.

 

[JasonS1974]

Finally had a chance to bolt these on. Need to get some better shots as this was just after I picked her up.

 

[ronnieb1958]

Finally had a chance to bolt these on. Need to get some better shots as this was just after I picked her up.

what size wheels and tires?

 

[949Racing]

Took pics of our new 19" 6UL's on a few other GT350's today.
The finish is called Beryllium.

 

[Whitey5.0]

Just got these in today

20x9/20x10.5 Velgen classic5's with 275/35 front 305/35 rear and BMR performance springs

 

[JasonS1974]

what size wheels and tires?

20x9 Front and 20x10.5 Rear wrapped in 265/35 and 295/30.

 

[Paul@PKAUTODESIGN]

Made and ready for some Track time !

BC Forged RZ05 Wheels

 

[VibeMotorsports]

Vorsteiner V-FF 107 carbon Graphite Finish
20x10 | 20x11

​

Sponsored