Pulser8
Well-Known Member
- Thread starter
- #1
Just had an alignment done at a local dealer and something feels way off. Not sure why they were not able to get the front in spec as I thought that was achievable without camber plates on the SP080. Also, the alignment machine scratched my new set of Velgens and the steering wheel is considerably off center with the wheels straight.
Anything concerning jump out on the alignment specs to you guys? Even the offset on some of the wheels looks different now.
Left front
Camber -2.2
Caster 6.8
Toe -0.02
Right front
Camber -1.5
Caster 7
Toe -0.04
Left Rear
Camber -2.1
Toe 0.14
Right Rear
Camber -2.0
Toe 0.12
Anything concerning jump out on the alignment specs to you guys? Even the offset on some of the wheels looks different now.
Left front
Camber -2.2
Caster 6.8
Toe -0.02
Right front
Camber -1.5
Caster 7
Toe -0.04
Left Rear
Camber -2.1
Toe 0.14
Right Rear
Camber -2.0
Toe 0.12
Sponsored