Magnetic w/ Black Rims

[Farmundeh]

Looking for pictures of this color combination for various styles of rims. Most of what I've seen so far had the various Velgen rims w/ magnetic, but I'm looking for additional options.

The MRR M350 and Forgestar cf10 were/are on my short list, but i'm not crazy about the delayed delivery with respect to both. It's already June and i'd like to have new wheels on my car sooner rather than later to enjoy them as much as possible for the summer months. Any feedback would be appreciated, thanks!!!:cheers:

Sponsored

 

[Khyber]

have some more velgen because asphians car = /thread over

 

[Farmundeh]

Hahahahaha I hear you dude! One of the best looking setups i've seen but I really, realllllllly prefer to run a square setup with 285/35 tires. If Velgen made 10" wide rims that would be ideal for me.

 

[Khyber]

i can't deny the benefits of a squared setup. There's just something about staggered that makes it worth it.

 

[Blk2015GT]

There are a few wheels out there with the same pattern that you can do square setups on- and the wheels are cheaper too.

MMD Zeven
Niche Targa

They're both about $250/wheel for 20x10s; almost half the cost of Velgens.

I just got a set of Niche 20x10 wheels (not Targas) from CJPP with their forum discount for under $1900 out the door with 275 Nitto 555 square and TPMS. You really can't beat that; some wheels alone cost that and up.

 

[Khyber]

difference is those mmd's and somewhat the targas aren't as wide or as concave as the velgen or near the same offsets. especially the mmd's they aren't really concave at all. just depends

warranty and finish differences as well of course.

it's all in what you want and what ya want to spend!

 

[carguy]

HRE FlowForm FF15 20x10 and 20x11.

 

[101charley]

There are a few wheels out there with the same pattern that you can do square setups on- and the wheels are cheaper too.

MMD Zeven
Niche Targa

They're both about $250/wheel for 20x10s; almost half the cost of Velgens.

I just got a set of Niche 20x10 wheels (not Targas) from CJPP with their forum discount for under $1900 out the door with 275 Nitto 555 square and TPMS. You really can't beat that; some wheels alone cost that and up.

Some wheels cost that PER WHEEL!

 

[DivineStrike]

Hahahahaha I hear you dude! One of the best looking setups i've seen but I really, realllllllly prefer to run a square setup with 285/35 tires. If Velgen made 10" wide rims that would be ideal for me.

I'm not necessarily interested in a square setup but I definitely want something a little wider up front for the Velgens. I really love this look. I am also curious about how these velgens look in 19's.

I am so at odds about what wheels I want. $600+ a wheel is pushing the envelope of what I want to spend. I can afford it just fine but at that price, I just feel the money is better spent elsewhere. Especially if I want two sets, a street set and something more performance oriented like the FF15's.... The velgens I want for DD work. 300-400 a wheel I would be much more comfortable with.

 

[Khyber]

I got my velgens for $425 a wheel shipped including 4x tpms and lugs.... so technically in the $300s per wheel

 

[DivineStrike]

not bad how much do they weigh?

 

[CarlosMRRDesignWheels]

Didi you get to see this latest post??? car belongs to one of the members here.
we did a 20x9 5x114.3 25et and 20x10.5 rears 43et

here are a few shots

 

[Farmundeh]

There are a few wheels out there with the same pattern that you can do square setups on- and the wheels are cheaper too.



MMD Zeven

Niche Targa



They're both about $250/wheel for 20x10s; almost half the cost of Velgens.



I just got a set of Niche 20x10 wheels (not Targas) from CJPP with their forum discount for under $1900 out the door with 275 Nitto 555 square and TPMS. You really can't beat that; some wheels alone cost that and up.

I've looked at both and I like the MMDs. I confirmed with AM that I could use the 19x10 on the front as well, but to Kyber's point they look a little flat. I'm not crazy about the Targas no matter how much i've tried to warm up to them. The spokes look a little on the thin side to me. Which set of Niche did you pick up? I've also considered the Essen.

I'm not necessarily interested in a square setup but I definitely want something a little wider up front for the Velgens. I really love this look. I am also curious about how these velgens look in 19's.



I am so at odds about what wheels I want. $600+ a wheel is pushing the envelope of what I want to spend. I can afford it just fine but at that price, I just feel the money is better spent elsewhere. Especially if I want two sets, a street set and something more performance oriented like the FF15's.... The velgens I want for DD work. 300-400 a wheel I would be much more comfortable with.

I'm with you regarding how much to spend. To me the M350 was really the best compromise and it looks great, but the wait is killer.

 

[Farmundeh]

Didi you get to see this latest post??? car belongs to one of the members here.
we did a 20x9 5x114.3 25et and 20x10.5 rears 43et

here are a few shots

Looks really sharp, but I think I have my heart set on black rims.

 

[CarlosMRRDesignWheels]

Looks really sharp, but I think I have my heart set on black rims.

If you like them we can easily get these powder coated in our facility
in either Matte Black or Gloss Black for you.
it only takes us about 5 business days to fully cut the specs for you and have the wheel powder coated. is all completed in house.

Sponsored