Brodirt
Well-Known Member
- Joined
- Aug 7, 2018
- Threads
- 10
- Messages
- 81
- Reaction score
- 23
- Location
- White Plains, NY
- Vehicle(s)
- 2018 Lightning Blue Ecoboost AT PP every option.
- Thread starter
- #1
2018 PP AT10.
I was investigating whether i have a bad connection to my MAP sensor which has thrown codes in my tuning process.
I changed the sensor and it still threw a code, it happened three times at WOT about 5500 rpm in 5th (AT10).
Next step was wires or connector so in the driveway after the care was warmed up I jiggled it and dis and re connected and then revved in neutral and the car wouldnt go past 5000-5100rpm.
Ive been to red line on the road.
Is there a neutral rev limiter?
I was investigating whether i have a bad connection to my MAP sensor which has thrown codes in my tuning process.
I changed the sensor and it still threw a code, it happened three times at WOT about 5500 rpm in 5th (AT10).
Next step was wires or connector so in the driveway after the care was warmed up I jiggled it and dis and re connected and then revved in neutral and the car wouldnt go past 5000-5100rpm.
Ive been to red line on the road.
Is there a neutral rev limiter?
Sponsored
