mike13241
Member
- Joined
- May 3, 2016
- Threads
- 0
- Messages
- 6
- Reaction score
- 2
- Location
- Sunshine Cali
- First Name
- Mikalala
- Vehicle(s)
- BadPony
Found another vendor (Ikon Motorsports) that sells these GT350 front fascia. Check out the fitted picture below
I called Ikon Motorsports and spoke with the sales there found out that they are doing a special on the next 5 bumper order ($999 unpainted version) and they'll include free paint job to match factory color. He said its a exclusive promotion they have for the product launch on ebay and it will only apply to the first 5 orders. I'm pretty temped to go for this one since only the first 5 gets free paint. Plus it would be nice to have it arrived painted so I don't have go through all the hassle and just bolt it on. Here's the link to the promoted listing:
http://www.ebay.com/itm/15-16-Ford-M...5XJ-dl&vxp=mtr
Their sales was also explaining to me the material difference. I believe Anderson Composite is using fiber glass material for there bumper while the Ikon Motorsports (maybe Carbon Dynamics) is using TPU material. As far as I know TPU is much more temperature resistant and flexible than fiber glass. In fact the flexibility will be a issue for bumpers. Because if you tap your fiber glass bumper to a wall the paint is most likely going to crack from the inside. At least I won't go for the fiber glass one.
I called Ikon Motorsports and spoke with the sales there found out that they are doing a special on the next 5 bumper order ($999 unpainted version) and they'll include free paint job to match factory color. He said its a exclusive promotion they have for the product launch on ebay and it will only apply to the first 5 orders. I'm pretty temped to go for this one since only the first 5 gets free paint. Plus it would be nice to have it arrived painted so I don't have go through all the hassle and just bolt it on. Here's the link to the promoted listing:
http://www.ebay.com/itm/15-16-Ford-M...5XJ-dl&vxp=mtr
Their sales was also explaining to me the material difference. I believe Anderson Composite is using fiber glass material for there bumper while the Ikon Motorsports (maybe Carbon Dynamics) is using TPU material. As far as I know TPU is much more temperature resistant and flexible than fiber glass. In fact the flexibility will be a issue for bumpers. Because if you tap your fiber glass bumper to a wall the paint is most likely going to crack from the inside. At least I won't go for the fiber glass one.
Sponsored