MrMike
Well-Known Member
Would this also require different tie rods and/or control arms, or would a new knuckle and hub bolt right on a 15-17?Better steering geometry from the GT350/500.
Sponsored
Would this also require different tie rods and/or control arms, or would a new knuckle and hub bolt right on a 15-17?Better steering geometry from the GT350/500.
No, Still steel knuckles from the Mach1/2024. Bolt on.Would this also require different tie rods and/or control arms, or would a new knuckle and hub bolt right on a 15-17?
Thanks. I have new control arms and brakes in hand but not installed yet so I am considering this as the front will already be apart.No, Still steel knuckles from the Mach1/2024. Bolt on.
I just stumbled upon your blog and was wondering about this.No, Still steel knuckles from the Mach1/2024. Bolt on.
PR3Z-3K186-AThanks. I have new control arms and brakes in hand but not installed yet so I am considering this as the front will already be apart.
I found the hub is PR3Z-1109-B from a Mach 1 HP, any idea what the part number is for the knuckle? Googling/searching the forum trying to find them.
Edit: Maybe NR3Z-3K186-A?
They have a much deeper bearing so I would say more robust.I just stumbled upon your blog and was wondering about this.
Other than the steering geometry.
Are the wheel hubs actually in the sense they will last longer? In blog you say they are the same ones on the Explorer which you would think they would last longer longer on a lighter vehicle.
Thanks. I ended up buying a kit and had no problems getting it all on my car in the end, but the kit did not include the bolts to attach the sensors to the knuckles.PR3Z-3K186-A
PR3Z-3K185-A
I just bought some.
Would those swap right in on a '18 Magride car ? Meaning would the existing hubs fit as they are ?PR3Z-3K186-A
PR3Z-3K185-A
I just bought some.
Negative completely differentWould those swap right in on a '18 Magride car ? Meaning would the existing hubs fit as they are ?
You'll need the entire setup w/knuckles, hubs, bolts and ABS sensors.Would those swap right in on a '18 Magride car ? Meaning would the existing hubs fit as they are ?
Thanks - but are they ? They are also mounted with 4 bolts, not with single nut. Thought those (NagrodÄ™) hubs were identical to GT 350 ones ?Negative completely different
Man, I wish I would have known about this when I swapped my control arms.They have a much deeper bearing so I would say more robust.
Now I read through all the info you have available. Does anyone in addition to Steeda sell a kit ?Negative completely different
Yes, 100% not the same as the GT350 / Magride hubs. Will not bolt up.Thanks - but are they ? They are also mounted with 4 bolts, not with single nut. Thought those (NagrodÄ™) hubs were identical to GT 350 ones ?
Just buy the knuckles from your local Ford Dealer and our Hubs. We have a love hate relationship with Ford parts, we usually lose money because they change prices constantly.Now I read through all the info you have available. Does anyone in addition to Steeda sell a kit ?
I'd have replace studs right from the get go - I know you have readily available hubs with long studs....