Different drops with 25mm wheel spacers

[Buellracer]

Anyone running 25mm spacer with your drop. Really wanting to do BMR 88/89 setup for the min drop on my vert but I don't know if that slight drop will give me enough negative camber to make the wheels still tucked in. I do not want them sticking out but flush.
What drops are you guys liking with these spacers?

Sponsored

 

[Doctor Fishtail]

Anyone running 25mm spacer with your drop. Really wanting to do BMR 88/89 setup for the min drop on my vert but I don't know if that slight drop will give me enough negative camber to make the wheels still tucked in. I do not want them sticking out but flush.
What drops are you guys liking with these spacers?

BMR springs are very little drop. You will be fine with those 25mm spacers. I ran the same 25mm spacers with 3 sets of springs. Steeda, H&R and Swift Spec-Rs. The H&Rs were the lowest of the 3 and it looked perfect!!!

 

[JAS550]

BMR SP080 with 25mm spacers.

 

[El_Centenario]

BMR performance springs and 25 mm spacers right here. No issues what so ever, rides great and no rubbing under any circumstances. You should be ok.

 

[Oko3612]

Steeda ultralites with 25mm spacers. I think it looks pretty decent:cheers:

 

[Doctor Fishtail]

*****Here is the H&R lowering springs.

 

[Oko3612]

Whats the drop on those H&R springs?

 

[Doctor Fishtail]

Whats the drop on those H&R springs?

1.1" in rear and 1.3" in the front. With these springs the drop was very sweet. I ran them with the PP dampers which absolutely sucked. I might put them back on now that the Konis are installed.

 

[T-S550-X]

Steeda Mustang Sport Springs - Progressive + 25mm spacers all around. 1.125" front and 1" rear drop.

 

[Buellracer]

Wow! All of these look great!
I've got the spacers already and seen a thread where someone had them on stock springs and it stuck out a bit so I was worried.
These look great though! Good job y'all!

Sponsored