Plimmer
Well-Known Member
- Joined
- May 10, 2015
- Threads
- 8
- Messages
- 669
- Reaction score
- 377
- Location
- San Antonio, TX
- First Name
- Rob
- Vehicle(s)
- 2015 Mustang GT
- Thread starter
- #1
Wanted to make the turbo guys aware of a really cool electronic boost controller made by SIRHC labs. I don't work for the company or know them, I came across them while doing a google search.
https://sirhclabs.com
Anyway I bought one of their controllers and so far I'm really happy with it. I'm using it for gear and rpm based boost control.
Basically it has 3 signal wires, one for rpm, one for vehicle speed and one for throttle or wideband input, I connected mine to throttle angle. Downside is you have to man up and splice these 3 wires into your harness, but good news is after you set up the EBC software you get gear/ rpm and throttle based boost control.
It can drive 2 external devices like a 2nd fuel pump or NOS solenoid, but I haven't gone that far at the moment.
Also you definitely need to read the manual, tons of features you need to know.
Like I said, I don't know these guys, just wanted to share a cool alternative to the traditional boost controllers out there.
https://sirhclabs.com
Anyway I bought one of their controllers and so far I'm really happy with it. I'm using it for gear and rpm based boost control.
Basically it has 3 signal wires, one for rpm, one for vehicle speed and one for throttle or wideband input, I connected mine to throttle angle. Downside is you have to man up and splice these 3 wires into your harness, but good news is after you set up the EBC software you get gear/ rpm and throttle based boost control.
It can drive 2 external devices like a 2nd fuel pump or NOS solenoid, but I haven't gone that far at the moment.
Also you definitely need to read the manual, tons of features you need to know.
Like I said, I don't know these guys, just wanted to share a cool alternative to the traditional boost controllers out there.
Sponsored