Boost Works 1200hp entry level twin turbo kit? Starting around $6k!

[Travis@boostworks]

Driver side with Precision turbo fit in place. Turbo is still well above the cross member.

Sponsored

 

[Brent Davis]

Yeah, you were right. I'm just stubborn and like to kill flies with sledgehammers. Lol

LMAO!

 

[doodguy]

I got my kit on order . I decided to go with the comp oil less turbo upgrade 62 mm. TrAvis is a great guy. I will do a write up on the install and results . I hope to have it by next weekend so I can do the install over the weekend.

Btw the pricing is $5995 for the base kit My comp upgrade put me at 6,695 if anyone was wondering.

How hard you planning on pushing this?

Im debating the quality of the kit and how hard 1k wheel will be to make with this. My whipple is out of steam and im wanting to hit the 1k wheel mark

 

[doodguy]

I'm sure it will take some time to get it all dialed in with fuel /exhaust etc but I'm sure I'll have some numbers to look at to start.

Cool Will keep eye out.

 

[15dib]

6695 was the price with just the upgraded turbos?
Also is that for a tuner kit?

 

[r1lovin]

Yeah what is the tuner price vs full kit?

 

[Travis@boostworks]

Finishing up one today. Still a good bit above the subframe, and fits perfectly!

 

[Travis@boostworks]

6695 was the price with just the upgraded turbos?
Also is that for a tuner kit?

That's the price with the ball bearing oil-less Comp turbos. Tuner kit.

 

[Travis@boostworks]

How hard you planning on pushing this?

Im debating the quality of the kit and how hard 1k wheel will be to make with this. My whipple is out of steam and im wanting to hit the 1k wheel mark

Quality is always top notch with anything we build. This is no different. This setup will easily make 1200whp. I've tested stock manifolds to that point with adapters. This is better since we're going with a turbo flange right at the collectors. So, it should flow even better.

 

[FreddyG]

WOW! I don't have a Mustang, but if I did, this kit would Definitely make it to my mod list!

I'm looking forward to seeing what this lit puts out!

Nice job Travis in building a Great looking kit at a fantastic price! :cheers:

 

[Travis@boostworks]

We're going to push one on a built engine and test back pressure. With the way we set this up, I bet it'll support a lot more than 1200whp.

 

[Gnfanatic]

Any issues with R/R the trans? Meaning are the turbos in the way and must be removed

 

[doodguy]

We're going to push one on a built engine and test back pressure. With the way we set this up, I bet it'll support a lot more than 1200whp.

I have a built engine if you need a donor ;)

 

[Travis@boostworks]

Any issues with R/R the trans? Meaning are the turbos in the way and must be removed

Yes, the turbos would need to be removed.. just like you would remove the factory cats/piping.

 

[Travis@boostworks]

Intercooler piping changes made. Only 2 slight tweaks to the first 2 pipes. The rest is the same as the original kit.

Sponsored