908ssp
Well-Known Member
- Thread starter
- #31
I ran the cable through the interior, under the carpet, in the corner of the passenger side, up over the inside fuse box out the big rubber boot, there along the harness and on to the engine compartment fuse box. The cable hooks up the same place it did previously and the starter cable bolts there as well. The grounds run together to the mount on the strut tower. The battery ground will go to the child seat bolt so the chassis will be the ground from the battery to the engine. This is the same arrangement I used on the 2010. I will install a breaker with switch on the battery so I can easily switch off the battery when working on the car.
Sponsored