altjx
GTFO_0036 | 1337 h4x3r
- Joined
- Jul 28, 2015
- Threads
- 88
- Messages
- 3,710
- Reaction score
- 1,527
- Location
- Atlanta, GA
- Website
- www.altonj.io
- First Name
- Alton J.
- Vehicle(s)
- 2017 Race Red GT350
- Thread starter
- #1
Any recommendations that may be already at a local autozone, advanced auto parts, etc? I just got some and realized I got tape that is waay too damn thick and it looks like the emblem is sticking out big time. The tape was also thick and only enough to put one strip down the middle, leaving the edges kind of bending out a little bit. Fortunately it wasn't stuck onto the fender badge, so I just took it right off after I realized how thick it was.
I know this is something I could Google, but I've tried getting thinner and thinner tape 2x and it's still too thick. I've also tried some 3M glue for emblems on cars, but it just leaves a big mess and takes forever and a day to dry.
Gonna see if mods can remove this thread after a few replies before the heat comes. I've checked with advanced auto parts and the thinnest they have is half an inch..
Thanks guys. :frusty: :frusty:
I know this is something I could Google, but I've tried getting thinner and thinner tape 2x and it's still too thick. I've also tried some 3M glue for emblems on cars, but it just leaves a big mess and takes forever and a day to dry.
Gonna see if mods can remove this thread after a few replies before the heat comes. I've checked with advanced auto parts and the thinnest they have is half an inch..
Thanks guys. :frusty: :frusty:
Sponsored
Last edited: