gmupatriot
Well-Known Member
- Joined
- Dec 15, 2017
- Threads
- 22
- Messages
- 657
- Reaction score
- 255
- Location
- Northern VA
- Vehicle(s)
- 2018 Mustang GT (Orange Fury), 401A, A10, 3.55
You will need to take off the A-pillar cover. Its not hard, just take your time pulling it off and be mindful that the bottom of the A-pillar near the dash is hooked into a J shaped hook. You will have to twist and turn the A-pillar around that base where it meets the dash. Once you have the A-pillar unhooked, you will need to make sure to un-hook the tweeter wire to you have complete removal of the pillar cover giving you room to work. I used a velcro tape to line the pillar and wrap the tweeter wire plug. Then put everything back together. Before you put things back, tap around the metal areas of the A-pillar to see if you hear the buzzing or rattle you experience. Also make sure the tweeter itself is secure and not lose and rattling. I used the velcro all over the pillar to tie down anything that felt like it could move around or rattle/buzz.How do you do this?
Good luck!
Sponsored