Sponsored

Sai Li Fuel System Install

joedrt73

Well-Known Member
Joined
Jun 4, 2016
Threads
7
Messages
75
Reaction score
5
Location
georgia
Vehicle(s)
2016 mustang gt base coupe
And how you mounted the relays would be great... just trying to do it right

thank you sir.
Sponsored

 
OP
OP

Jay159866

Well-Known Member
Joined
Sep 14, 2015
Threads
22
Messages
399
Reaction score
77
Location
Florida
Vehicle(s)
2015 GT 1966 Coupe
I mounted the relays just behind that panel.
 

joedrt73

Well-Known Member
Joined
Jun 4, 2016
Threads
7
Messages
75
Reaction score
5
Location
georgia
Vehicle(s)
2016 mustang gt base coupe
I got them to load off the email from the post. You tapped the purple wire? I thought it was supposed to be the yellow/grey or you get the wrench light ?
 

Sponsored

OP
OP

Jay159866

Well-Known Member
Joined
Sep 14, 2015
Threads
22
Messages
399
Reaction score
77
Location
Florida
Vehicle(s)
2015 GT 1966 Coupe
joedrt73 said:
I got them to load off the email from the post. You tapped the purple wire? I thought it was supposed to be the yellow/grey or you get the wrench light ?
Click to expand...
You can tap either one. I used the purple before I knew you should tap the yellow/grey and I already had it sliced due to my BAP.
Go with the yellow/grey for non-continuous priming.
 
Last edited:

joedrt73

Well-Known Member
Joined
Jun 4, 2016
Threads
7
Messages
75
Reaction score
5
Location
georgia
Vehicle(s)
2016 mustang gt base coupe
Jay159866 said:
You can tap either one. I used the purple before I knew you should tap the yellow/grey and I already had it sliced due to my NAP.
Go with the yellow/grey for non-continuous priming.
Click to expand...
I did wire the yellow/grey and no wrench light. Thanks for your pics and great write up ....
 

joedrt73

Well-Known Member
Joined
Jun 4, 2016
Threads
7
Messages
75
Reaction score
5
Location
georgia
Vehicle(s)
2016 mustang gt base coupe
After starting the car a second time I am getting a cel P0627 "Fuel Pump A circuit open". I have to clear the DTC to get the light off. Them comes back on next restart.

I have the yellow wire (pin 5) which is going to the 2 blue wires. It primes and shuts off but still throws the light.

Any ideas??
 
OP
OP

Jay159866

Well-Known Member
Joined
Sep 14, 2015
Threads
22
Messages
399
Reaction score
77
Location
Florida
Vehicle(s)
2015 GT 1966 Coupe
joedrt73 said:
After starting the car a second time I am getting a cel P0627 "Fuel Pump A circuit open". I have to clear the DTC to get the light off. Them comes back on next restart.

I have the yellow wire (pin 5) which is going to the 2 blue wires. It primes and shuts off but still throws the light.

Any ideas??
Click to expand...
The fuel pump harness wires should be yellow to yellow and black to blue.
The FPDM should be the two little blue wires to the yellow/grey (instead of purple/green like my photo shows).

Is this how you have it?
 

Sponsored

joedrt73

Well-Known Member
Joined
Jun 4, 2016
Threads
7
Messages
75
Reaction score
5
Location
georgia
Vehicle(s)
2016 mustang gt base coupe
Yes. The 2 blue wires to yellow/grey on FPDM connector and yellow to yellow and black to blue.
 
You must log in or register to reply here.
 




Top