jbailer
Well-Known Member
Any chance you're going to port this to Apple ios for all the iPhone users?
Sponsored
Any chance you're going to port this to Apple ios for all the iPhone users?
I might do it whenever I get some times. I quit apple couple years ago. Problem is if I do it Apple Store won't let me publish it. I will have to give y'all the .IPA (which is easy to install even if you're not jailbroken).Any chance you're going to port this to Apple ios for all the iPhone users?
I enabled nav in motion on my car and do not get the "English selected" message. Everything functions as normal.Nice! Well done!! What about the nav in motion code? It works, but says "English selected" evertime you start the cat.
Also, what about just putting enable and disable state in same card, instead of completely seperate?
Is this on a Sync 2 or Sync 3 system? I'd love to see confirmation (or otherwise) from someone who has tried the nav lockout fix on a Sync 3 system with success.I enabled nav in motion on my car and do not get the "English selected" message. Everything functions as normal.
I enabled nav in motion and don't get the English Selected message either, but the clock jumped ahead 5 hours.I enabled nav in motion on my car and do not get the "English selected" message. Everything functions as normal.
if you have a 2015 then you have different version of sync I believe.I enabled nav in motion on my car and do not get the "English selected" message. Everything functions as normal.
So after I turned on the parking lamp DRLs I've noticed that the front "gill lights" dim during the day whenever my parking brake is disengaged.Enabled DRL Selection:
726-50-01: XXxx
XX:
01 = Disabled / Parking Lights Only (See change below)
02 = Low Beams
04 = Front Fog Lamps
08 = Front Turn Lamps
10 = Dedicated DRL Lights (LED Light Bars/Strips) - Enables BCM DRL Outputs - C2280F Pins 36 (Right) and 40 (Left)
20 = High Beams
40 = Low Beams and Dedicated DRL Lights
Is this what you are looking for? ;)[MENTION=12253]papinist[/MENTION]: I didn't have a a sensitivity settings in the central display for Autolamps (Switching on). I just can set the autolamp time delay (Switching off). This feature keeps the headlights on for up to 120 seconds after the ignition is switched off. Any hints to reduce the switching on time?
Hi gt_stang, yes, thats exactly thats what i'm looking for. I think he's doing this about forscan as well. But which code?Is this what you are looking for? ;)
https://s550.guru/shop/licht/lichtsensor-schaltverzoegerung-sunload-autolight/