Recent content by gtorpedo

P0300 is tricky (multiple random misfire) but p0302 tells you an issue in cylinder 2. Check your plugs and ignition coils? misfire codes are not something to be ignored (but you knew that already).

Good taste!

ughh is right!! That is disappointing and unsettling as the "other shop" built my entire longblock.

Al will tell you for optimum performance, you want the front fins of the vent flush to ~2" behind the radiator. The block off plates allow you to shift the center vent forward enough to accomplish this and cover the existing hole you made for the Trackspec vent. Also may look into his side...

The 2018 Trackspec/RaceLouvers replacement hood vent is a bit different, but call up Al @racelouvers, tell him you want the same setup for the 2015-2017. He just did mine and it came out perfect (virtually no additional cutting req'd. for the center vent).

The stock water/oil cooler works very well - would not remove that if you can, and run both your MMR cooler and stock cooler. I run a Setrab 948 with an Improved Racing remote oil filter mount/t-stat and Improved Racing remote oil plate. Depending on your use the MMR kit on its own may be...

The MMI setup is easier to adjust ride height (no need to pull the wheels off) so that's a big plus. So far, not regrets, but certainly a steep price tag! Any plans to head back out to the track when China Virus subsides?

This set allows the use of standard 2.25"/60mm springs and rear ride height adjustability in the factory divorced spring location. Came off my JRZ RS Pro coilovers (I switched to the MMI adjusters for easier ride height adjustment). Price $200 shipped.

Lund and PBD are good options as Andrew noted. AED is another excellent option. Get rid of the Bama tune ASAP

Looking to trade my trunk lid with the Steeda Race Wing installed (and painted to match) for a plain, no holes drilled or spoiler installed trunk lid (must also be black). Obviously would be a local transaction, no shipping. PM me if you are interested and we can work out a deal. I live in...

Yes still available

Selling a set of Ridetech Level 2 HQ coilovers complete with all hardware, 400lb front/600lb rear Hyperco springs, Hyperco front helper springs and Vorshlag camber/caster plate adapters (the plates themselves are not included but can be purchased separately). I also have a set of 500lb rear...

Steering wheel SOLD. Airbags available.

The airbags? They came from my 2015. The GT350R steering wheel is a few years old but probably only 5k miles on it. Its pristine.

sorry moderators for the multiple posts, looks like there was a glitch on the upload. please delete the duplicative listings, thanks.