Post Pix of your S550 with aftermarket wheels and tires

[cush]

This is my Ecoboost PP Premium with Savini BS02 wheels. The wheels are 20x9.5" with +35mm offset, square setup. I custom ordered them about back in October. They are a 2 piece chrome wheel with gold metallic paint inside the spokes and on the ring that attaches the barrel & lip to the center spokes. The barrel & lip are forged and the inner spokes are cast. I was hoping to lose some weight with the wheels, but the only weighed a few ounces less than the 19" PP wheels. I guess with the center being cast and all those rivets joining the wheel adds a lot of weight. I love the way they look even though they are a pain to clean! I also have the whole front end Xpel Ultimate covered and the windows tinted with Ultimate 40% ceramic tint. I also have Diode Dynamics map light, glove box, backup, trunk, and running LED lights.

You say they are 20" wheels, but the tires say 19" or at least that's what it looks like...

Sponsored

 

[MELLOWYELLOW06]

You say they are 20" wheels, but the tires say 19" or at least that's what it looks like...

I'm sure it was a typo as you can clearly see in the last picture, zoom in of the wheel, 255/40/19 on the sidewall.

Good eye cush, I looked and went right on by without noticing.

 

[FlowForm_Wheels]

A little teaser

More HRE FF01's.

Heck yeah Jay, can't wait to see yet another FlowForm equipped S550 role out of your shop!

Here's mine:
HRE FF01's Tarmac
20 x 9.5 Front, 20 x 10.5 Rear
Nitto Invo's 275/35/20 Front, 295/35/20 Rear

Kelly, that second shot is just tooooo goood! It was great seeing your car in person at the HG Motorsports Open House this weekend.

Looks Good Getz. I have the same exact setup in my garage. Have not been able to get them on the car yet.

Can't wait to see it all together Scott. Your going to be grinning from ear to ear.

i'd like a list of wheels to do a 19x10 square fit (275/40/19), no mods, easy on and off!

Hi Ronnie, we will have our FF15 available as both a 19x10 square set up, that is a direct bolt on with nothing else needed, and a 19x10/19x11 option as well. With the chaos at the Long Beach Port, I would realistically say we would have them by end of March.

 

[Proudgeek]

i'd like a list of wheels to do a 19x10 square fit (275/40/19), no mods, easy on and off!

I am receiving my 19x10 CF10s with 285/40-19s later this week. Will post photos over the weekend.

 

[byklin]

Heck yeah Jay, can't wait to see yet another FlowForm equipped S550 role out of your shop!



Kelly, that second shot is just tooooo goood! It was great seeing your car in person at the HG Motorsports Open House this weekend.



Can't wait to see it all together Scott. Your going to be grinning from ear to ear.



Hi Ronnie, we will have our FF15 available as both a 19x10 square set up, that is a direct bolt on with nothing else needed, and a 19x10/19x11 option as well. With the chaos at the Long Beach Port, I would realistically say we would have them by end of March.

any pictures of the 19x10/19x11 option? also what offsets would those be at? thanks!

 

[Agarc]

Im planning on doing bathurst later or as soon as i get my tax money lol

 

[Kbreese]

Im planning on doing bathurst later or as soon as i get my tax money lol

Great choice. Can't wait to see them on S550(s)

 

[Tron]

I am receiving my 19x10 CF10s with 285/40-19s later this week. Will post photos over the weekend.

sploosh.


the bathurst sound great but the 19x9.5 with +40 offset has me kind of ehh. was hoping to get +35..really dont want to spend $400 a wheel and need spacers still.

 

[rcb020]

I am receiving my 19x10 CF10s with 285/40-19s later this week. Will post photos over the weekend.

What color did you get them in? I'm looking at that same setup in piano black with pilot super sports 285/40 as well. I might wait a bit and do staggered with 19x11 in rear and run a 285/35 front and 305/35 rear thats on the gt350.

 

[Velgen]

Check out this mustang on Velgen Wheels
VMB7s Matte Gunmetal
20x9 & 20x10.5​

 

[Proudgeek]

What color did you get them in? I'm looking at that same setup in piano black with pilot super sports 285/40 as well. I might wait a bit and do staggered with 19x11 in rear and run a 285/35 front and 305/35 rear thats on the gt350.

Gloss gunmetal :love:

 

[cush]

Im planning on doing bathurst later or as soon as i get my tax money lol

Gunmetal or Silver? I was thinking about Gunmetal for my Guard GT PP.

 

[Khyber]

Check out this mustang on Velgen Wheels
VMB7s Matte Gunmetal
20x9 & 20x10.5​

 

[ronnieb1958]

lololololol

 

[Kbreese]

LOL, exactly right. You have rotary forged wheels from TSW going for $100 less per wheel. They are going for the marketing thing to charge money off their name. Meanwhile companies like TSW have a far more established name. But hey, I'm sure they are making a lot of money off of less informed consumers, so who's to judge. It's the American way.

Sponsored