notstok5.0
IG: notstok5.0
- Joined
- Aug 11, 2015
- Threads
- 15
- Messages
- 323
- Reaction score
- 131
- Location
- Eastern PA
- Website
- www.mustang6g.com
- First Name
- Eric
- Vehicle(s)
- 2015 Ingot GT
- Vehicle Showcase
- 1
- Thread starter
- #1
Experiencing the following symptoms - turn the car on and the ABS light and 2 traction control icons pop up with an alert "Advance Trac Service". As I start to drive they clear out and will stay off as long as I don't go over 10mph. The instant I'm over 10mph the steering gets tighter, the ABS light + 2 traction icons + Air bag light will pop up and the "Avance Trac Service" alert comes back. I've pulled the trouble codes and it's a U0415.
Everything I've read leads me to believe this is an ABS sensor/wheel hub issue. I've tested each wheel hub for play and they are all tight. I've cleaned the wheel hub ABS ring and speed sensor in case of any metal shavings. My next step is going to be to check each speed sensor with an Ohm meter and rotate each wheel hub to test for an AC signal.
Just wondering if anyone else has experienced these symptoms and has a solution I'm not thinking of? I have also read a loose ground could be the culprit but all the grounds mentioned in the other topics on this were tight for me.
Thanks :cheers:
Everything I've read leads me to believe this is an ABS sensor/wheel hub issue. I've tested each wheel hub for play and they are all tight. I've cleaned the wheel hub ABS ring and speed sensor in case of any metal shavings. My next step is going to be to check each speed sensor with an Ohm meter and rotate each wheel hub to test for an AC signal.
Just wondering if anyone else has experienced these symptoms and has a solution I'm not thinking of? I have also read a loose ground could be the culprit but all the grounds mentioned in the other topics on this were tight for me.
Thanks :cheers:
Sponsored