MyLilPony's STG2 D1SC Wastegated Procharged Build @texas_yote

[MyLilPony]

Awesome build man, I'm about to be wastegated in a few weeks too, how much of a difference in feel does it make before/after?

That sucking back in the seat feeling you normally get around 5 to 5500 happens at 3500 now. I see 2/3 psi higher across the rpm band and you fee all of it! Going to a 4.0 pulley soon. That should help add an additional 1/2 and make things really fly!

Plan to hit the rollers soon?

Just waiting for a dyno event to come up. It a cheap ass in some respects and since I don't "need" dyno time I have been lazy about setting it up. They do dyno events pretty regularly and as soon as one shows up I am there. I hung with Doc and he dyno'd at 797. So I am guessing low 7's high 6's.

Next up e85 or turbo and e85 lol

Sponsored

 

[ahl395]

That sucking back in the seat feeling you normally get around 5 to 5500 happens at 3500 now. I see 2/3 psi higher across the rpm band and you fee all of it! Going to a 4.0 pulley soon. That should help add an additional 1/2 and make things really fly!

Awesome, thanks for the feedback. Can't wait!

 

[MyLilPony]

Rather than spend $50 for some kit, I decided to procure and make my own for 50% the cost /)

 

[MyLilPony]

Cleaned up the engine bay a bit. Added 1/2" not 3/4" as
Pictured above; I returned those. Also added a factory hose clip to re route the evap purge valve. It got rid of the big ass loop that was there. Looks much better!

Those looking for a breather set up, go to Amazon and order the 1/2 k&n with 2in top. Part number 62-1330. $40 for two K&N versus $50 for two no name breathers from others.

Before and after pics below.

 

[MyLilPony]

Some pics from a show a little while back

 

[SVT-DADDY]

Sorry if this is a newb question. When you say waste gated, are you basically limiting your top end boost so you can run more down low?

I like the idea of being able to get into the boost sooner, without running huge numbers up top.

 

[Phoenix]

Sorry if this is a newb question. Why you say waste gated, are you basically limiting your top end boost so you can run more down low?

I like the idea of being able to get into the boost sooner, without running huge numbers up top.

yes

 

[MyLilPony]

yes

lol yep this, more boost down low, same boost up top

 

[scrubber3]

A red strut tower brace would look great on there. And add a little stability.

Nice build!

 

[SVT-DADDY]

lol yep this, more boost down low, same boost up top

Me likey this! I look forward to you latest dyno!

Do you still run a blow off valve in this set up or does the waste gate handle everthing?

 

[MyLilPony]

A red strut tower brace would look great on there. And add a little stability.

Nice build!

I agree unfortunately no room with the Boss manifold. All of my BMR Suspension pieces are red. Underneath my car is gorgeous because of [MENTION=9985]BMR Tech[/MENTION]. No one ever gets to see it though :( CB005 CB006 CB044 CB045 etc. all in red

Me likey this! I look forward to you latest dyno!

Do you still run a blow off valve in this set up or does the waste gate handle everthing?

I plan on hitting the dyno again on the 29th. Going to do another low boost high boost pull with the new mani.

I run both still. The BOV is constantly open as the PC is always building Boost. Once boost kicks in the BOV closes and the wastegate gets to work. I crematory have it set to stay 100% closed until 10psi then it opens to begin its work to regulate to 12 or 14#..

 

[MyLilPony]

AHHH damn!!! Things just got real! These wheels are SICK!!!!

The car already broke necks, now it is going to hospitalize people!!

MRRWheels.com check out their customer colors...I went between this one and the Bright_Gold...Brushed Anodized Red won out for obvious reasons!

More pics to come! Thansk [MENTION=14702]CarlosMRRDesignWheels[/MENTION] ! The wheels are taking the Pony to a whole new level!



Wheel - M600 - Brushed Anodized Red

Front 20x10
Rear 20x11

 

[Phoenix]

#shouldagotgold

still looks kickass!!!!!

 

[MyLilPony]

#shouldagotgold

still looks kickass!!!!!

ha! next time? I REALLY liked the gold...like a lot!

 

[ahl395]

Nice and bright, gonna look awesome!

What tires are you putting on them?

Sponsored