Blk2015GT
Well-Known Member
Bueller? :shrug:Can anyone with the template still tell me what size drill bits are needed to prepare. Awaiting shipping of mine from Levittown.
Sponsored
Bueller? :shrug:Can anyone with the template still tell me what size drill bits are needed to prepare. Awaiting shipping of mine from Levittown.
Thanks!1/8" 3.0mm
9/32" 7.0mm
25/64" 10.0mm
33/64" 13.0mm
Any updates on this?I purchased mine from LMR.com(GT350 styled and unpainted). Ill post about quality and install once received this Friday.
https://lmr.com/item/LRS-FG018RW/hcm-carbon-gt350-fiberglass-track-pack-wing-mustang-15-16
Sorry...nope, I ended up sending it back to them because it didn't come with an install template. the quality seemed pretty solid, but total cost seemed like it would be more than just buying the OEM black wing.Any updates on this?
Can't use imgur links anymore here in the forumsAnyone else encounter issues making the curved edge sit flush along the back? I'm surprised it would be this far off - especially since I ensured the template lined up with the top edge of the trunk lid.
Any suggestions on the quickest way to enlarge the holes inwards? It's probably off by 3-5mm.
http://imgur.com/Ka5A8Ua
Damn, well I'm going to give it a whirl. I didn't get a templet either. I took it to a paint shop and they said they would do it for $150 with install. so im in for $475 because I had a helpful promo code. I just hope they are not doofues while installing it. If I get scared you may see me posting it for sale on here painted (factory black)Sorry...nope, I ended up sending it back to them because it didn't come with an install template. the quality seemed pretty solid, but total cost seemed like it would be more than just buying the OEM black wing.
$350 for the wing
$250 to have it painted(quoted form 4 places)
+$ and then install on top of that since it didn't come with the template to do myself.
That is very odd. Mine is flush. I'd almost request another one. I know it's a pain but it should fit perfect imo.Drilled the holes and got it in. Not as big a deal as it seems.
Only issue Im having is a little lift at the front corner on the passenger side. Driver is flush.
It looks a lot worse in the SUPER zoomed in pic that it is. It's maybe 1/16th inch. You can see where the light between starts but the back half is firmly on there. Its just 2 inches back and maybe 3 from the corner toward the middle on that corner.
I was just surprised for OEM it didnt clip in at the end holes with the red plastic (shown below) to hold it out beyond the bolts since the edges always are the issue.
Obviously it isnt coming off so Im not pulling it off and re-taping it all with 3M for 3 inches of a tiny tiny gap you wont even know its there. I double cleaned it with IPA so I know its not the prep.
Yes, As an accessory kit it will include all installation hardware and templates.
-Benny
Thanks. Just wanted to know if anyone got to install it on their V6 because the factory spoiler on V6 is different from the GT one.If you have the stock spoiler it will just bolt on. If you are spoiler-less, you need to drill the holes. It will work on your V6.